Input Specifications
Eingangsspezifikationen
Single output
Dual output
Input current max. (no load)
Eingangsstrom max. (Leerlauf)
5 V models
12 V models
24 V models
72 V models
70 mA
30 mA
15 mA
20 mA
180 mA
60 mA
30 mA
20 mA
Start up time
Einschaltverzögerung
200 ms max.
Reflected ripple current max.
(Decoupling capacitor 10 µF)
Reflektierter Rippelstrom max.
(Entkopplungskondensator 10 µF) 12 V models
5 V models
100 mApp
50 mApp
30 mApp
50 mApp
200 mApp
100 mApp
50 mApp
50 mApp
24 V models
72 V models
Output Specifications
Ausgangsspezifikationen
Single output
Dual output
Voltage accuracy
Einstellgenauigkeit
± 2 % max.
Regulation
Regelabweichungen
– Line regulation
– Load regulation 25 –90 %
– Eingangsspannungsänderung
– Laständerung 25 –90 %
± 1.0 % max.
± 2.0 % max.
Ripple and noise (20 MHz bandwidth)
Restwelligkeit (20 MHz Bandbreite) 5 V output
50 mVpp max.
100 mVpp max.
150 mVpp max.
12 V output
15 V output
Capacitive load
Kapazitive Last
5 V output
12 V output
15 V output
470 µF max.
470 µF max.
470 µF max.
470 µF max.
220 µF max.
22 µF max.
Efficiency
Wirkungsgrad
78 % typ.
Short circuit protection
General Specifications
Kurzschlussicherheit
continuous/ dauernd
Allgemeine Spezifikationen
Isolation voltage
– Input/ Output
– Input/ Case
Prüfspannung
– Eingang/ Ausgang
– Eingang/ Gehäuse
– Ausgang/ Gehäuse
1’500 VDC / 1 min.
1’500 VDC / 1 min.
1’500 VDC / 1 min.
– Output / Case
Isolation resistance I/ O (‘500 VDC)
Isolationswiderstand E/ A (‘500 VDC)
100 MOhm min.
480 kHz typ.
Switching frequency
Schaltfrequenz
Operating temperature range
No derating up to 71 °C
Case temperature
Betriebstemperaturbereich
Ohne Leistungsrücknahme bis 71 °C
Gehäusetemperatur
–40 °C ... +85 °C
+85 °C max.
Storage temperature range
Lagertemperaturbereich
–45 °C ... +105 °C
Temperature coefficient (–40 °C to 85 °C)
Temperaturkoeffizient (–40 °C bis 85 °C)
± 0.02 % / °C
Accuracy, MTBF (MIL-HDBK-217 F)
Zuverlässigkeit, MTBF (MIL-HDBK-217 F)
ground fixed at case temperature 40 °C
ground fixed bei Gehäusetemperatur 40 °C
1.4 Mio. h
Humidity
Vibration
Feuchtigkeit
Vibrationen
IEC68-2-3
93 % rel H. max.
IEC68-2-6
10 cycles in each axis,
10 to 60 Hz / 60 Hz to 2000 Hz
amplitude: 0.7 mm / 10 g
Shock
Schock
IEC68-2-27
IEC68-2-29
IEC68-2-14
3 shocks in each axis,
100 g, 6 ms
Shock (continuous)
Temperature cycling
Schock (kontinuierlich)
Temperatur - Zyklus
2000 bumps in each directions,
25 g, 6 ms
200 cycles from –40 °C to +75 °C
EN 55022 class A / B
Conducted noise emission to
(see application note)
leitungsgebundene Störungen gemäss
(Applikationsnote beachten)
Radiated noise emission to
abgestrahlte Störungen gemäss
(see application note)
(Applikationsnote beachten)
EN 55022 class A, FCC part 15 J
Electrical discharge susceptibility to
Störfestigkeit gegen elektrische Entladung gemäss
EN 61000-4-2
EN61000-4-4
8 kV (air)*
2 kV*
Electrical fast transient susceptibility to
* Performance criterium B
Störfestigkeit gegen schnelle Transienten gemäss
* Auswirkungsklasse B
All specifications valid at nominal input voltage, full load
and +25 °C after warm-up time unless otherwise stated
Alle Spezifikationen gültig bei Nominal-Eingangsspannung, Vollast
und +25 °C nach Aufwärmzeit, ausgenommen anders spezifiziert