DC/ DC Converter
TED Series
2 Watt
Input Specifications
Input current no load
5 Vin models:
12 Vin models:
24 Vin models:
140 mA typ.
25 mA typ.
15 mA typ.
Input current full load
5 Vin models:
12 Vin models:
24 Vin models:
650 mA typ.
255 mA typ.
125 mA typ.
Input filter
Pi-Filter
Output Specifications
Voltage set accuracy
± 2 %
Regulation
– Input variation Vin min. to Vin max.
– Load variation 10 – 90 %: single output:
dual output:
± 0.5 % max.
± 1.0 % max.
± 2.0 % max.
Ripple and noise (20 MHz Bandwidth)
80 mVpk-pk max.
± 0.05 % / °C
Temperature coefficient
Short circuit protection
continuous
Capacitive load
– Single output models
– Dual output models
2200 µF max.
2200 µF max.
General Specifications
Temperature ranges – Operating
– 25 °C ... +75 °C
+ 95 °C
– Case
– Storage
– 40 °C ... +115 °C
Humidity (non condensing)
95 % rel H max.
Reliability, calculated MTBF (MIL-HDBK-217 E)
>1’000’000 h @ 25 °C
Isolation voltage
– Input/ Output
– Input/ Case
500 VDC
500 VDC
– Output/ Case
– Output/ Output
500 VDC
500 VDC (dual output)
Isolation capacity
Isolation resistance
Switching frequency
– Input/ Output
– Input/ Output
470 pF typ.
>1‘000 M Ohm
20 – 75 KHz (depending on load)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2
TRACOPOWER [ TRACO ELECTRONIC AG ]
