TEC 3 Series, 3 Watt
Output Specifications (continued)
Capacitive load
– Single output
3.3 Vout models: 4400 µF max.
5.0 Vout models: 2200 µF max.
9.0 Vout models: 1300 µF max.
12 Vout models: 1000 µF max.
15 Vout models: 820 µF max.
24 Vout models: 470 µF max.
– Dual output
5.0 Vout models: 1200 µF max. (each output)
12 Vout models: 520 µF max. (each output)
15 Vout models: 440 µF max. (each output)
General Specifications
Temperature ranges
– Operating (natural convection: 20 LFM, 0.1 m/s)
– Case temperature
–40°C to +90°C
+105°C max.
– Storage temperature
–55°C to +125°C
Derating
3.4%/K above 75°C
5 – 95 % rel H max.
1‘600 VDC
Humidity (non condensing)
Isolation voltage
– I/O isolation voltage (60 s)
Isolation resistance (input/output)
1 GOhm min.
Isolation capacitance (input/output)
50 pF max.
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign)
Switching frequency
5‘124‘000 h
100 kHz min. (pulse frequency modulation)
MIL-STD-810F
Shock, vibration and thermal shock
Remote On/Off
– On:
– Off:
– Off idle current:
open circuit or high impedance
2 – 4 mA current applied via 1kOhm resistor
2.5 mA typ.
Safety standards
– Desinged to meet (no certification)
IEC/EN/UL 62368-1, UL 60950-1
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
Physical Specifications
Casing material
non-conducting black plastic
Silicone (UL 94V-0 rated)
tinned copper
Potting material
Pin material
Package weight
4.5 g (0.16 oz)
Soldering profile
260°C / 10 s max. (wave soldering)
Supporting Documents: www.tracopower.com/overview/tec3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 3 of 4
TRACOPOWER [ TRACO ELECTRONIC AG ]
