TDN 1WI Series, 1 Watt
General Specifications
Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign)
8‘400‘000 h
Switching frequency
100 kHz min. Pulse frequency modulation.
Thermal shock & vibration
MIL-STD-810F
Remote On/Off
–On:
–Off:
–Off idle current:
open circuit or high impedance
2 – 4 mA current applied via 1kOhm resistor
2.5 mA max.
Environmental compliance – Reach
www.tracopower.com/products/reach-declaration.pdf
RoHS directive 2011/65/EU
– RoHS
Physical Specifications
Casing material
non-conducting plastic
silicone (UL 94V-0 rated)
2.7g (0.10oz)
Potting material
Package weight
Soldering temperature
max. 260°C / 6 sec
Supporting Documents: www.tracopower.com/overview/tdn1wi
Outline Dimensions
Pin-Out
Single
13.2 (0.52)
5.07 (0.2)
10.2 (0.40)
9.9 (0.39)
Pin
1
Dual
+Vin (Vcc)
+Vin (Vcc)
2
–Vin (GND) –Vin (GND)
4
On/Off
no con.
–Vout
On/Off
–Vout
1
2
5
6
7
5
6
Common
+Vout
7
+Vout
4
4.5 (0.18)
bottom viev
Dimensions in [mm], () = Inch
Tolerances: x.x
0.5 ( 0.02)
0.25 ( 0.01)
0.1 ( 0.004)
Pin pitch tolerances
Pin dimension tolerance
©
Copyright 2017 Traco Electronic AG
Specifications can be changed without notice!
Rev. June 23, 2017
Page 3 of 3
www.tracopower.com