Industrial Power Supplies
TCL Series
24–120 Watt
General Specifications
Safety standards
IEC 60950, EN 60950 (output SELV),
UL 60950, UL 508, EN 50178,
EN 60204, EN 61558-2-8.
- NEC class 2 (TCL 60 models only)
Safety approvals (TCL 24 models pending)
UL/cUL 60950 recognized, File E181381
UL 508C listed, File E210002
CB-Report per IEC 60950
Electromagnetic compatibility (EMC), Emissions
Electromagnetic compatibility (EMC), Immunity
Safety class
EN 61000-6-3
EN 61000-6-2
degree of protection class 1
IP 20 (IEC 60529)
Case protection
Enclosure material
plastic FR2010-110C (UL 94V-0 rated)
Mounting
35 mm DIN-rails as per EN 50022-35x15/7.5
(snap-on with self-locking spring)
Adapter for Wall-/Chassi Mounting (included)
Options
output characteristic optimized for battery
charging available on request
TCL–REM240 Redundancy Module
This module enables redundant operation of any two TCL models by decoupling
the 2 power supplies. It can also be used to separate sensitive loads from the main
power source.
Models
Order code
Inputs
Vin
Max power
per input
Output voltage
Output current
max.
Connection
TCL–REM240
2 x 5...60 VDC
144 W
Vin – 0.9 VDC
8 A
detachable screw
terminal block
Specifications
Operating temperature
– 10°C...+70°C max. (14°F...+158°F)
derating above 40°C (104°F): 1.5%/K
Electromagnetic compatibility
Dimensions
in correspondence to connected units
(no internal switching device)
same as model TCL 24 (see page 4)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 3 of 5
TRACOPOWER [ TRACO ELECTRONIC AG ]
