HV-Power Supplies
PHV Series
3.5 - 5 Watt
Input Specifications
Input voltage
+10.8VDC to +16.5 VDC
none
Reverse voltage protection
Conducted noise (input)
Output Specifications
Voltage accuracy
internal filter
5 %
Voltage adjustement range
(adjustable with external voltage 0 to +6 VDC or with 5 kOhm varaiable resistor)
0 – 100%
Remote ON /OFF control
ON = pin 2 to pin 5 open
OFF = pin 2 to pin 5 short
Regulation
– Input variation Vin min. to Vin max.
– Load variation 0 – 100 %
0.01 % maꢀ.
0.01 % maꢀ.
Ripple and noise (20 MHz Bandwidth)
Temperature coefficient
Stability
100 mVpk-pk maꢀ.
0.01 % / °C
0.05% 8h after warm-up time
>110% of Iout maꢀ., constant current
indefinite
Current limitation
Short circuit protection
General Specifications
Temperature ranges – Operating
– Case temperature
– Storage
– 10 °C ... + 50 °C
+ 90 °C maꢀ.
– 25 °C ... + 75 °C
Derating above 40°C
4 % /°C
Humidity (non condensing)
Efficiency
30 – 95 % rel H maꢀ.
60 – 65%
Reliability, calculated MTBF (MIL-HDBK-217 E)
>300’000 h @ + 25 °C
none
Isolation voltage
Vibration
Input/Output
5 –10 Hz amplitude 10 mm pk-pk
10 – 55 Hz acceleration 2 G
Shock
acceletration 20 G maꢀ. time 11 ms
Physical Specifications
Case material
steel chrom-nickel plated
65 g (2.29 oz)
Weight
Soldering temperature
maꢀ. 260 °C / 10 sec.
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
www.tracopower.com
Page 2