TSA7887
ELECTRICAL SPECIFICATIONS (continued)
VDD = +2.7V to +5.25V; VREF = 2.5V External/internal reference unless otherwise noted; fSCLK = 2 MHz;
TA = TMIN to TMAX, unless otherwise noted.
Parameter
A Version1
B Version1
Unit
Test Conditions/Comments
POWER REQUIREMENTS
VDD
+2.7/+5.25
+2.7/+5.25
V (min/max)
IDD
Normal Mode4 (PM Mode 2)
Static
700
850
700
450
120
12
700
850
700
450
120
12
μA (max)
μA (typ)
Internal reference enabled
Internal reference disabled
fSAMPLE = 50 ksps
fSAMPLE = 10 ksps
fSAMPLE = 1 ksps
VDD = 2.7V to 5.25V
VDD = 2.7V to 3.6V
VDD = 4.75V to 5.25V
VDD = 5 V
Operational (fSAMPLE = 125 kSPS)
Using Standby Mode (PM Mode 4)
μA (typ)
μA (typ)
μA (typ)
Using Shutdown Mode
(PM Modes 1 and 3)
Standby Mode5
μA (typ)
210
1
210
1
μA (max)
μA (max)
μA (max)
mW (max)
mW (max)
μW (max)
μW (max)
mW (max)
μW (max)
Shutdown Mode5
2
2
3.5
2.1
5
3.5
2.1
5
Normal Mode Power Dissipation
Shutdown Power Dissipation
Standby Power Dissipation
VDD = 3 V
VDD = 5 V
3
3
VDD = 3 V
1.05
630
1.05
630
VDD = 5 V
VDD = 3 V
Note 1: The TSA7887’s temperature range is –40°C to +125°C for both A and B versions.
Note 2: SNR calculation includes distortion and noise components.
Note 3: Sample tested at TA = 25°C to ensure compliance.
Note 4: All digital inputs at GND except for CS at VDD. All digital outputs are unloaded. Analog inputs are connected to GND.
Note 5: SCLK is at GND when SCLK is off. All digital inputs are at GND except for CS at VDD. All digital outputs are unloaded. Analog inputs
are connected to GND.
Page 4
TSA7887DS r1p0
RTFDS