TS7001
ELECTRICAL SPECIFICATIONS (continued)
VDD = +2.7V to +3.6V; VREF = 2.5V External/internal reference unless otherwise noted; fSCLK = 3 MHz;
TA = TMIN to TMAX, unless otherwise noted.
Parameter
Limit1
Unit
Test Conditions/Comments
POWER REQUIREMENTS
VDD
+2.7/+3.6
V (min/max)
IDD
Normal Mode4 (PM Mode 2)
Static
0.6
0.85
0.7
mA (max)
mA (typ)
mA (typ)
mA (typ)
mA (typ)
mA (typ)
mA (max)
μA (max)
mW (max)
μW (max)
mW (max)
Internal reference enabled
Internal reference disabled
fSAMPLE = 50 ksps
fSAMPLE = 10 ksps
fSAMPLE = 1 ksps
Operational (fSAMPLE = 187.5 ksps)
Using Standby Mode (PM Mode 4)
0.45
0.12
0.012
0.21
1
Using Shutdown Mode
(PM Modes 1 and 3)
Standby Mode5
Shutdown Mode5
VDD = 2.7V to 3.6V
VDD = 2.7V to 3.6V
VDD = 3 V
Normal Mode Power Dissipation
Shutdown Power Dissipation
Standby Power Dissipation
2.1
3
VDD = 3 V
0.63
VDD = 3 V
Note 1: The TS7001’s temperature range is –40°C to +85°C.
Note 2: SNR calculation includes distortion and noise components.
Note 3: Sample tested at TA = 25°C to ensure compliance.
Note 4: All digital inputs at GND except for CS at VDD. All digital outputs are unloaded. Analog inputs are connected to GND.
Note 5: SCLK is at GND when SCLK is off. All digital inputs are at GND except for CS at VDD. All digital outputs are unloaded. Analog inputs
are connected to GND.
Page 4
TS7001DS r1p0
RTFDS