DC/DC Converters
THL 3WI(SM) Series 3 Watt
Pysical Specifications
Casing material
non-conductive plastic (UL94V-0 rated)
DIP models: 5.4 g (0.19 oz)
SMD models: 4.2 g (0.14 oz)
regulation EC 1907/2006
Package weight
Environmental compliance – Reach
– RoHS
directive 2011/65/EU
Soldering profile for DIP-package models
max. 265°C / 10 sec. (wave soldering)
Lead-free reflow solder process for SMD-package models
as per J-STD-020D.01 (to find at:
www.jedec.org - free registration required)
Moisture sensivity level (for SMD-package models)
level 2a as per J-STD-033B.01 (to find at:
www.jedec.org - free registration required)
Packaging
www.tracopower.com/products/thl3wism-pack.pdf
Application note: www.tracopower.com/products/thl3wi-application.pdf
www.tracopower.com/products/thl3wism-application.pdf
Outline Dimensions
DIP-Models
16
1
2
Pin-Out
10
9
7
8
Pin
1
Single
–Vin (GND)
Remote On/Off
ntc.
Dual
–Vin (GND)
Remote On/Off
ntc.
0.5
(0.02)
1.77
(0.07)
10.16 (0.4)
13.7 (0.54)
2
4.1
(0.16)
8.0
(0.31)
7
8
ntc.
Common
+Vout
9
+Vout
SMD-Models
10
16
–Vout
–Vout
+Vin (Vcc)
ntc. = not to connect
+Vin (Vcc)
0.25
(0.01)
13.7 (0.54)
18.1 (0.71)
8.0 (0.31)
Dimensions in [mm], () = Inch
Tolerances: 0.25 ( 0.01)
Pin pich tolerances: 0.13 ( 0.005)
Specifications can be changed any time without notice.
Rev. 08/12
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · info@traco.ch · www.tracopower.com
Page 3 of 3