MKW2000 SERIES
DC/DC CONVERTER 12W
Total Power International, Inc.
Notes
1
2
3
4
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
Ripple & Noise measurement bandwidth is 0-20MHz.
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however they may not meet all specifications listed.
5
6
7
8
9
All DC/DC converters should be externally fused at the front end for protection.
Other input and output voltage may be available, please contact factory.
To order the converter with Remote On/Off function, add suffix RC (e.g. MKW2021-RC) to order code.
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
Specifications subject to change without notice.
Package Specifications
Mechanical Dimensions
Pin Connections
Pin
1
Single Output
+Vin
Dual Output
+Vin
2.54
[0.10]
10.16
[0.40]
10.16
[0.40]
2
-Vin
-Vin
3
+Vout
+Vout
4
No Pin
-Vout
Common
-Vout
5
6
Remote On/Off
Remote On/Off
4
5
3
NC: No Connection
Bottom View
2
6
1
►All dimensions in mm (inches)
7.62
5.08
7.62
►Tolerance: X.X±0.25 (X.XX±0.01)
[0.30] [0.20] [0.30]
6.0
10.2
[0.24]
[0.40]
X.XX±0.13 ( X.XXX±0.005)
25.4 [1.00]
►Pin diameter 1.0 ±0.05 (0.04±0.002)
Physical Characteristics
Case Size
Case Material
Pin Material
Weight
:
:
:
:
50.8x25.4x10.2mm (2.0x1.0x0.4 inches)
Metal with Non-Conductive Baseplate
Copper Alloy with Gold Plate Over Nickel Underplate
31.7g
Total Power International, Inc
Toll Free: 877-646-0900
www.total-power.com