MJW25 SERIES
DC/DC CONVERTER 25W, Highest Power Density
Total Power International, Inc.
Efficiency Curve @25℃
100
90
80
70
60
50
40
100
90
80
70
60
50
40
36V
48V
75V
36V
48V
75V
10
20
30
40
50
60
70
80
90
100
10
20
30
40
50
60
70
80
90
100
% of Full Load
% of Full Load
MJW25-48D12 Efficiency vs Load Current
MJW25-48D15 Efficiency vs Load Current
Notes
1
2
3
4
5
6
7
8
9
Specifications typical at Ta=+25℃, resistive load, nominal input voltage, rated output current unless otherwise noted.
Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%.
Ripple & Noise measurement bandwidth is 20 MHz, measured with a 1μF MLCC and a 10μF Tantalum Capatitor.
All DC/DC converters should be externally fused at the front end for protection.
Other input and output voltage may be available, please contact factory.
To order the converter with heatsink, please add a suffix -HS (e.g. MJW25-24S05-HS) to order code.
The MJW25 series can meet EN61000-4-4 & EN61000-4-5 by adding a capacitor across the input pins.Suggested capacitor:CHEMI-CON KY 220μF/100V.
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
Pin Connections
Pin
1
Single Output
Dual Output
+Vin
25.4 [1.00]
+Vin
-Vin
10.16
[0.40]
10.16
[0.40]
6.0
10.16 0.5
2
-Vin
[0.24] [0.40 0.02]
3
+Vout
+Vout
3
4
5
4
Trim
Common
-Vout
5
-Vout
6
Remote On/Off
Remote On/Off
Bottom View
►All dimensions in mm (inches)
1
2
6
►Tolerance: X.X±0.25 (X.XX±0.01)
X.XX±0.13 ( X.XXX±0.005)
5.08
[0.20] [0.30]
7.62
2.54
[0.10]
►Pin diameter 1.0 ±0.05 (0.04±0.002)
Physical Characteristics
Case Size
:
:
:
:
:
25.4x25.4x10.16mm (1.0x1.0x0.4 inches)
Aluminium Alloy, Black Anodized Coating
FR4 PCB (flammability to UL 94V-0 rated)
Case Material
Base Material
Pin Material
Weight
Copper Alloy with Gold Plate Over Nickel Subplate
16.5g
Total Power International, Inc
Toll Free: 877-646-0900
www.total-power.com