MGWI06 SERIES
DC/DC CONVERTER 6W, DIP Package
Total Power International, Inc.
Notes
1
2
3
4
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%
Ripple & Noise measurement bandwidth is 0-20MHz.
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these modules;
however, they may not meet all specifications listed.
5
6
7
All DC/DC converters should be externally fused at the front end for protection.
Other input and output voltage may be available, please contact factory.
Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
Pin Connections
Pin
Single Output
Dual Output
Remote On/Off
-Vin
1
2
Remote On/Off
-Vin
NC
6
Common
-Vout
8
NC
9
+Vout
-Vout
+Vin
+Vout
0.50 [0.02]
11
16
Common
+Vin
2.54
[0.10]
10.16 [0.40]
NC: No Connection
1
2
6
8
9
Bottom View
11
16
►All dimensions in mm (inches)
►Tolerance: X.X±0.25 (X.XX±0.01)
12.7 [0.50] 5.08
1.9
[0.20]
[0.08]
X.XX±0.13 ( X.XXX±0.005)
21.6 [0.85]
►Pin diameter 0.5 ±0.05 (0.02±0.002)
Physical Characteristics
Case Size
Case Material
Pin Material
Weight
:
:
:
:
21.6x20.3x10.2 mm (0.85x0.8x0.4 inches)
Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Copper Alloy with Gold Plate Over Nickel Subplate
9.1g
Total Power International, Inc
Toll Free: 877-646-0900
www.total-power.com
TOTAL-POWER [ TOTAL POWER INTERNATIONAL ]
