MCWI03 SERIES
DC/DC CONVERTER 3W, SIP-Package
Total Power International, Inc.
Power Derating Curve
Notes
1
2
3
4
Specifications typical at Ta=+25℃, resistive load, nominal input voltage and rated output current unless otherwise noted.
Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%.
Ripple & Noise measurement bandwidth is 0-20 MHz measured with a 1µF M/C.
These power converters require a minimum output loading to maintain specified regulation, operation under no-load conditions will not damage these
modules; however, they may not meet all specifications listed.
5
6
7
8
All DC/DC converters should be externally fused at the front end for protection.
Other input and output voltage may be available, please contact factory.
That “natural convection” is about 20LFM but is not equal to still air (0 LFM).
Specifications are subject to change without notice.
Package Specifications
Mechanical Dimensions
Pin Connections
Pin
1
Single Output
Dual Output
-Vin
21.8 [0.86]
-Vin
+Vin
2
+Vin
3
Remote On/Off
NC
Remote On/Off
NC
5
6
+Vout
+Vout
7
-Vout
Common
-Vout
8
NC
0.5
[0.02]
2X2.54
[2X0.10] [0.20]
3X2.54
[3X0.10]
2.0
[0.08]
5.08
NC: No Connection
20.8 [0.82]
Bottom View
►All dimensions in mm (inches)
►Tolerance: X.X 0.5 (X.XX 0.02)
1
2
3
5
6
7
8
X.XX 0.25 ( X.XXX 0.01)
►Pins 0.1( 0.004)
0.50
[0.02]
Physical Characteristics
Case Size
Case Material
Pin Material
Weight
:
:
:
:
21.8x9.3x11.2 mm (0.86x0.37x0.44 inches)
Non-Conductive Black Plastic (flammability to UL 94V-0 rated)
Alloy 42
4.8g
Total Power International, Inc
Toll Free: 877-646-0900
www.total-power.com