More about the EMV-Ready turnkey
application:
Single Smart Card Reader: Teridian 73S1112F
Asynchronous Serial
9.6Kbps to 115Kbps
When programmed with the EMV-Ready
application, the Teridian 73S1112F/
Host Controller
User Smart-Card
Tx
Rx
ISO-7816-3
73S1120F devices operate as a slave to the
host controller. The host controller (master)
exchanges some simple commands via the
serial interface in order to activate/ deacti-
vate the card, to enable an automated PTS
negotiation with the card and of course
to exchange APDU commands with the
card, regardless of the protocol and speed.
Smart card management can be handled
with very few commands (SCardConnect,
SCardStatus, ScardTransmit, ScardControl
etc). The ScardControl command is also
used by the host to control the 73S1112F
/73S1120F device directly. For example,
Power management (Normal/Idle/OFF
modes), User I/Os, host interrupt enable,
serial interface speed etc, can be controlled
using simple ScardControl commands.
Also, the Teridian EMV-Ready application
includes an EMV “loop-back” routine (also
accessible through a ScardControl com-
mand) that is required by EMV/MasterCard
-accredited laboratories when performing
EMV/MasterCard type approvals. This can
help to reduce type approval test time. In
order for the host controller to control the
73S1112F/73S1120F device, the host must
implement the Teridian proprietary protocol,
which is based on a Command Interpreter
layer, operating a challenge/response
scheme. The format of these commands
is a subset of the PC/SC specification. In
addition, the commands are encapsulated
within a Teridian proprietary HDLC protocol
that handles error detection and correction.
Teridian application engineers can assist
with integration of the protocol into the host
system, so that the whole implementation of
the card reader function can be completed
within a few days.
Interrupt (Optional)
Using USR:5 Line
Manages card presence
and status
Configuration and Card Communication Link
Dual/Multiple Smart Card Reader: Teridian 73S1120F + 73S8010X
Asynchronous Serial
9.6Kbps to 115Kbps
User Smart-Card
ISO-7816-3
Host Controller
Tx
Rx
Second User Smart-Card or SIM / SAM
ISO-7816-3
Interrupt (Optional)
Using USR:5 Line
Manages card presence and status
Configuration & Card
Communication Link
SIM / SAM
ISO-7816-3
SDA
SCL
ISO-7816-3
ISO-7816-3
Interrupt
IO_UC
Features
Single 2.7V to 3.6V power supply
Package: 44 LQFP [64LQFP]
EMV-Ready Firmware Stack:
Microcontroller:
• 80C52 core
• 64KB Flash/4KB User XRAM
• In the field firmware updates using
In-System-Programming (ISP)
• Single low cost 12MHz crystal
• Embedded security fuses to permanently
disable the ISP mode.
• Supports T=0, T=1 protocols
• PTS negotiation
• Communication with the card: up to
115 kbps
• Supports ISO 7816 and EMV
• Expandable to support JICSAP and ISO
7816 Part 4 extended cases
• Supports external Teridian 73S8010x ICs
• EMV /MasterCard loopback test routine
• Host interface: 9.6kbps default,
configurable up to 115kbps
• Host protocol: Subset of PC/SC
Commands, encapsulated under
Teridian HDLC protocol
• Reporting of faults: Polling from host
or interrupt
Smart Card Interfaces:
• (1) [2] ISO-7816/EMV4.0 interfaces
• Built-in DC-DC converter
• Supports 3V/5V smart cards
• ISO 7816 UART with a 2-Byte FIFO
• Auxilliary I/O lines for synchronous
card support
Communication & Peripherals:
• 1 Serial interface (1200bps to
115Kbps UART)
• (11) [15] User I/Os
For immediate technical information and the name of a local representative or distributor,
visit www.teridian.com, send an e-mail to support@teridian.com or call (714) 508-8800.
No responsibility is assumed by Teridian Semiconductor Corporation for use of this product nor for any infringements of patents and trade-
marks or other rights of third parties resulting from its use. No license is granted under any patents, patent rights or trademarks of Teridian
Semiconductor Corporation, and the company reserves the right to make changes in specifications at any time without notice. Accordingly,
the reader is cautioned to verify that the data sheet is current before placing orders.
6440 Oak Canyon, Irvine, CA 92618-5201
714-508-8800 (Tel)
© 2005 Teridian Semiconductor Corporation
8/05 - rev 2.0
714-508-8878 (Fax)
TERIDIAN [ TERIDIAN SEMICONDUCTOR CORPORATION ]
