MOLDED WIREWOUND CHIP INDUCTORS
HWI453232 SERIES
9. RELIABILTY TEST :
TERMINAL
STRENGTH-PULL
TEST
TERMINAL SHALL NOT
BE LOOSENED OR
RUPTURED
A 0.5KG LOAD SHALL BE APPLIED TO BOTH
TERMINALS IN THE AXIS DIRECTION FOR
1 MINUTE.
THE TERMINAL SHALL
BE AT LEAST 90ꢀ
AFTER FLUXING% INDUCTOR SHALL BE DIPPED IN
A MELTED SOLDER BATH AT ꢁ40 5°C FOR
5 SECONDS.
SOLDERABILITY TEST
COVERED WITH SOLDER
THERE SHALL BE NO
CASE DEFORMATION
CHANGE IN
RESISTANCE TO
SOLVENT TEST
MIL-STD-ꢁ0ꢁF% METHOD ꢁ15D
APPEARANCE OR
OBLITERATION OF
MARKING
CLIMATIC TEST
TEMPERATURE
1. INDUCTORS SHALL BE
NO EVIDENCE OF
ELECTRICAL AND
MECHANICAL
-40°C ----- +1ꢁ5°C
CHARACTERISTIC
1. TEMP :40 ꢁ°C
HUMIDITY TEST
COLD TEST
ꢁ. R.H. :90 ----- 95ꢀ
ꢂ. TIME :96 ꢁ HOURS
DAMAGE
ꢁ. INDUCTANCE SHALL
NOT CHANGE MORE
THAN 10ꢀ
1. TEMP :-ꢁ5 ꢁ°C
ꢁ. TIME :96 ꢁ HOURS
ꢂ. Q SHALL NOT
CHANGE MORE THAN
ꢁ0ꢀ
ROOM TEMP
15 MINS
-40 ꢁ°C
ꢂ0 MINS
+1ꢁ5 ꢁ°C
ꢂ0 MINS
THERMAL SHOCK
TEST
ROOM TEMP
15 MINS
TOTAL :5 CYCLES
1. TEMP :85 ꢁ°C
DRY HEAT TEST
ꢁ. TIME :96 ꢁ HOURS
1. TEMP :85 ꢁ°C
HIGH TEMPERATURE
LOAD LIFE TEST
ꢁ. TIME :1000 1ꢁ HOURS
ꢂ. LOAD :ALLOWED DC CURRENT
THERE SHALL BE NO
EVIDENCE OF SHORT OR
OPEN CIRCUITING
1. TEMP :40 ꢁ°C
ꢁ. R.H. :90 ----- 95ꢀ
HUMIDITY LOAD LIFE
ꢂ. TIME :1000 1ꢁ HOURS
4. LOAD :ALLOWED DC CURRENT
Note :
Unless otherwise specified% allow the specimen to stand at room temperature for 1 hour
or more but more than ꢁ hours% measure the electrical and mechanical performances
NOTE : Specifications subject to change without notice. Please check our website for latest information.
26.02.2009
SUPERWORLD ELECTRONICS (S) PTE LTD
PG. 6
SUPERWORLD [ SUPERWORLD ELECTRONICS ]
