SMM764
Preliminary Information
ABSOLUTE MAXIMUM RATINGS
ABSOLUTE MAXIMUM RATINGS
Temperature Range (Industrial)...........–40°C to +85°C
Temperature Under Bias....................... -55°C to 125°C
Storage Temperature............................ -65°C to 150°C
Terminal Voltage with Respect to GND:
(Commercial)..............0°C to +70°C
VDD Supply Voltage ..................................2.7V to 5.5V
12VIN Supply Voltage1 ............................6.0V to 14.0V
VIN ............................................................ GND to VDD
VOUT...................................................... GND to 14.0V
Package Thermal Resistance (θJA)
VDD Supply Voltage ......................... -0.3V to 6.0V
12VIN Supply Voltage..................... -0.3V to 15.0V
PUPA, through PUPF....................... -0.3V to 15.0V
All Others ................................-0.3V to VDD + 0.7V
Output Short Circuit Current ............................... 100mA
Lead Solder Temperature (10 s)..........................300°C
Junction Temperature.......................................... 150°C
ESD Rating per JEDEC ....................................... 2000V
Latch-Up testing per JEDEC.............................±100mA
48 Lead TQFP ................................................80oC/W
Moisture Classification Level 1 (MSL 1) per J-STD- 020
RELIABILITY CHARACTERISTICS
Data Retention.............................................. 100 Years
Endurance..............................................100,000 Cycles
Note - The device is not guaranteed to function outside its operating rating.
Stresses listed under Absolute Maximum Ratings may cause permanent
damage to the device. These are stress ratings only and functional operation
of the device at these or any other conditions outside those listed in the
operational sections of the specification is not implied. Exposure to any
absolute maximum rating for extended periods may affect device performance
and reliability.
recommended.
Devices are ESD sensitive. Handling precautions are
DC OPERATING CHARACTERISTICS
(Over recommended operating conditions, unless otherwise noted. All voltages are relative to GND.)
Symbol
Parameter
Supply voltage
Notes
Min
2.7
10
Typ
Max
5.5
Unit
V
V
VDD
Internally regulated to 5.5V
Internally regulated to 3.6V
14
14
12VIN
Supply voltage
6
V
All TRIM pins floating,
12VIN floating
All TRIM pins floating,
VDD floating
IDD
Power supply current from VDD
Power supply current from 12VIN
3
3
5
mA
I12VIN
5
mA
TRIM characteristics
TRIM sourcing maximum
current
1.5
1.5
mA
mA
V
TRIM output current through
ITRIM
100Ω to 1.0V
TRIM sinking maximum
current
Depends on TRIM range
of DC-DC converter
VTRIM
Margin and ADOC range
VREF/4
VDD
TRIM_CAP characteristics
TRIM output current through 1uF Max acceptable board and
ITRIM_
100
nA
CAP
capacitor to ground
cap leakage is 50 nA 2
All other input and output characteristics
0.8 x
Input high voltage (MR#, SDA,
VDD = 2.7V
VDD = 5.0V
VDD = 2.7V
VDD = 5.0V
V
V
V
V
VDD_CAP
VIH
SCL, PWR_ON, SEQ_LINK,
0.7 x
FS#)3
VDD_CAP
0.2 x
Input low voltage (MR#, SDA,
SCL, PWR_ON, SEQ_LINK,
FS#)3
VDD_CAP
VIL
0.3 x
VDD_CAP
Summit Microelectronics, Inc
2098 1.1 6/29/2005
8