SNC26300
One Channel Speech Controller
5.7 PWM Output
An PWM circuit is built-in SNC26300. The maximum resolution of PWM is 8 bits.
Two huge output stage circuits are designed in SNC26300. With this advanced
circuit, the chip is capable of driving speaker directly without external transistors.
BUO1
BUO2
PWM Output
5.8 Watch Dog Timer
SNC26300 built an internal WDT (Watch Dog Timer). This Watchdog timer would
issue resets signal to this chip if it is not cleared before reaching terminal count (128
ms). The watchdog timer is enabled at reset and cannot be disabled.
5.9 IR Function
P23 can be modulated with 38.5KHz square wave before sent out to P23 pin.
The IR signal can be achieved by this modulated signal.
5.10
PWM IO control
SNC26300 has support 8 PWM IO (P20~P23, P30~P33). Each I/O has 8 bit
independent duty register, and the 8 bit register are compare with 8 bits counter. If set
use PWM IO function and internal counter start at 000H, the mapping I/O will set High.
The 8 bits counter increment if the same duty register, that will reset the mapping IO
pin.
6. ABSOLUTE MAXIMUM RATING
Items
Symbol
VDD-V
VIN
Min
-0.3
Max
6.0
Unit.
V
Supply Voltage
Input Voltage
VSS-0.3
0
VDD+0.3
55.0
V
Operating Temperature
Storage Temperature
TOP
oC
oC
TSTG
-55.0
125.0
7
Ver: 1.7
October 14, 2009