欢迎访问ic37.com |
会员登录 免费注册
发布采购

SNC21168A 参数 Datasheet PDF下载

SNC21168A图片预览
型号: SNC21168A
PDF下载: 下载PDF文件 查看货源
内容描述: 1 - CH H.Q.语音控制器 [1-CH H.Q. Speech Controller]
分类和应用: 控制器
文件页数/大小: 11 页 / 141 K
品牌: SONIX [ SONIX TECHNOLOGY COMPANY ]
 浏览型号SNC21168A的Datasheet PDF文件第1页浏览型号SNC21168A的Datasheet PDF文件第2页浏览型号SNC21168A的Datasheet PDF文件第3页浏览型号SNC21168A的Datasheet PDF文件第4页浏览型号SNC21168A的Datasheet PDF文件第6页浏览型号SNC21168A的Datasheet PDF文件第7页浏览型号SNC21168A的Datasheet PDF文件第8页浏览型号SNC21168A的Datasheet PDF文件第9页  
SNC21168A  
1-CH H.Q. Speech Controller  
5. FUNCTION DESCRIPTIONS  
5.1 Oscillator  
System clock define 2MHz, the source provided by external resistor ring oscillator.  
5.2 ROM  
SNC21168A contains a substantial maximum 512K words (10-bit) internal ROM,  
which is shared by program and resource data. Program, voice and data are shared  
within this same 512K words ROM.  
5.3 RAM  
SNC21168A contains maximum 128 nibble RAM (128 x 4-bits). The 128 nibble RAM  
is divided into eight pages (page 0 to page 7, 16 nibble RAM on each page). In our  
programming structure, users can use the instructions, PAGE n (n=0 to 7) to switch  
and indicate the RAM page. Besides, users can use direct mode, M0 ~ M15 in the  
data transfer type instructions, to access all 16 nibbles of each page.  
5.4 Power Down Mode  
“End” instruction makes the IC entering into Stop Mode will stop the system clock for  
power savings (<3uA @VDD=3V and <6uA @VDD=4.5V.) Any valid data transition  
(LH or HL) occurring on any IO pin can be used to start the system clock and  
return to normal operating mode.  
5.5 Sampling Rate Counter  
The unique sampling rate counter is designed in voice channel to be able to play  
diverse voices at different sample playing rates. The playing rate can be adaptively  
set up among from the wide ranges of 2.5KHz to 20KHz. This architecture yields a  
high-quality voice synthesis that sounds very close to its original source when played  
through the same amplifier and speaker circuitry.  
5.6 Auto Repeat Function  
A voice section can be repeated by the built-in special hardware of SNC21168A  
without any software effort. The function activated by setting the corresponding bit of  
a control register. Once the control register was setting, the channel will continue to  
play the voice section (the Next Section).  
5.7 I/O Ports  
There are four 4-bit I/O ports P1, P2, P3 and P6. Any I/O can be individually  
programmed as either input pull low or output. Any valid data transition (HL or  
LH) of P1, P2, P3 and P6 can reactivate the chip when it is in power-down stage.  
5
Ver1.1  
April 28, 2009