SL2411
PIN DESCRIPTION
NAME
PIN
DESCRIPTION
VCC
RSL
1
2
3
4
5
6
7
8
Positive power supply.
External resistor
LFI
Input low frequency oscillator
Output low frequency oscillator
Negative power supply
LF0
GND
HF0
HFI
OUT
High frequency oscillator output
High frequency oscillator input
Tone output
MAXIMUM RATINGS*
Symbol
Parameter
Value
to +30.0
400
Unit
V
VCC
PD
DC Supply Voltage (Referenced to GND)
Power Dissipation in Still Air, Plastic DIP
Storage Temperature
mW
°C
Tstg
-65 to +150
*
Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
Parameter
DC Supply Voltage (Referenced to GND)
Operating Temperature
Min
13.0
-45
Max
29.0
+65
Unit
V
TA
°C
This device contains protection circuitry to guard against damage due to high static voltages or electric
fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated
voltages to this high-impedance circuit. For proper operation, V and VOUT should be constrained to the range
IN
GND£(V or VOUT)£VCC.
IN
Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or V ).
CC
Unused outputs must be left open.
System Logic
SLS
Semiconductor