PMR SERIES
□ RELIABILITU PERFORMANCE
Measurement
Method
Test Item
Condition of Test
Requirements
-60°C to + 150°C, 1000 cycles,
15 minutes at each extreme
Refer to
Thermal Shock
Short Time Overload
Low Temperature Storage
High Temperature Exposure
Bias Humidity
± 0.5%
± 0.5%
± 0.5%
± 0.5%
± 0.5%
± 0.5%
± 0.5%
± 1.0%
± 0.5%
± 0.5%
JIS C 5202 7.4
Refer to
5 x rated power for 5 seconds
Kept - 60°C for 24 hours
JIS C 5202 5.5
Refer to
JIS C 5202 7.1
Refer to
Kept + 170°C for 1000 hours
JIS C 5202 7.11
+ 85°C, 85% RH, 10% Bias,
1000 hours
-
Refer to
Mechanical Shock
Vibration
100G’s for 6 milliseconds, 5 pulses
JIS C 5202 6.2
Frequency varied 10 to 2000Hz
in one minute,
-
3 directions, 12 hours
1000 hours @ rated power, + 70°C,
1.5 hours “ON”, 0.5 hours “OFF”
Refer to
Load Life
JIS C 5202 7.10
+ 260°C Solder,10 - 12 second dwell,
25mm/second emergence
Refer to
Resistance to Solder Heat
Moisture Resistance
JIS C 5202 6.4
MIL-STD-202, Method 106,
-
0% power, 7a and 7b not required
http:// www.sirectsemi.com
SIRECT [ Sirectifier Global Corp. ]
