SiI 9020 Features
HDMI Transmitter
Si
I
9020
DRAM
SPDIF
Compliance
• HDMI 1.2
ITU.656
8-bits
Image
SiI 9020
HDMI
Connector
• DVI 1.0
Sensor
• EIA/CEA-861B
• HDCP 1.1
MPEG
Encoder
System on Chip
Audio
Component
Video
DigitalVideo Output
• Integrated TMDS PanelLink® core
• Supports DTV (480i/576i/480p/
576p/720p/1080i) resolutions
• Supports PC(VGA/XGA/
SXGA/WSXGA) resolutions
• Flexible video input interface supports
HD MPEG decoders
Y/C
CVBS
Flash
- 12/24-bit RGBYCbCr 4:4:4
- 16/20/24-bitYCbCr 4:2:2
- 8/10/12-bitYCbCr 4:2:2 (ITU-R BT.601
& BT.656)
System Operation
• Register-programmable via slave I2C
interface
Silicon Image’s
SiI 9020 Software
and Documentation
• Master I2C simplifies system design
—
• IntegratedYCbCr
conversion
—
<
>
RGB color space
• Flexible interrupt registers with interrupt
pin
Software
• 9020 Firmware
• 4:2:2
<
>
4:4:4 up-converter
• Monitor detection supported through hot
plug and receiver detection
• Programmable Data Enable (DE) generator
Documentation
Digital Audio Output
• DVD-Audio support thru 4xI2S inputs
• Supports 2-channel 192kHz or 8-channel
96kHz
• Programmer's Reference Application
Note
Power Management
• 1.8V core provides low-power operation
• Flexible power-down modes
• Supports IEC60958 2-channel PCM
or IEC61937 compressed audio
(Dolby Digital, DTS, etc.)
Package
• 84 ball BGA (6 x 6 mm footprint)
• Industry-standard S/PDIF input
Part Number - SiI9020CSU
Silicon Image, Inc.
©2005 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, SiI, SiI 9002, PanelLink, the PanelLink logo
andTMDS are trademarks or registered trademarks of Silicon Image, Inc. in the United States and other countries. Other
trademarks are the property of their respective holders. Product specifications are subject to change without notice.
Printed in the U.S.A. 12/05 SiI PB-0071
1060 E. Arques, Sunnyvale, CA 94085
T 408.616.4000 F 408.830.9530
www.siliconimage.com
SILICONIMAGE [ Silicon image ]
