SC16315S
APPLICATIONS
Display memory is updated by incrementing addresses. Please refer to the following diagram.
Figure 14: display memory updated by address increments
STB
CLK
Command 2
Command 3
Data 1
Data n
Command 1
Command 4
DIN
where : Command1: display mode setting command
Command2: data setting command
Command3: address setting command
Data 1 to n: transfers display data (24 bytes max.)
Command4: display control command
The following diagram shows the waveforms when updating specific addresses.
Figure 15: address update.
STB
CLK
Data
Command 2
Command 3
Command 3
Data
DIN
Where: Command 2— data setting command
Command 3— address setting command
Data— display data
HANGZHOU SILAN MICROELECTRONICS CO.,LTD
Http: www.silan.com.cn
REV:1.2
2004.03.01
Page 9 of 13
SILAN [ SILAN MICROELECTRONICS JOINT-STOCK ]
