Model No. GH16P32C8C
“Contents in this technical document be changed without any notice due to the product modification.”
http://www.sharp-world.com/products/device/
■ꢀRatings and Characteristics
ꢀꢀꢀAbsolute Maximum Ratings
(Tc=25℃(Note 1))
Parameter
Symbol
Value
100
Unit
mW
Optical power output
CW
P
o
Reverse voltage
Vrl
Top（ｃ）
Tstg
2
V
Laser diode
Operating temperature
Storage temperature
-10 ～ +70
-40 ～ +85
350
℃
℃
℃
CW Operation(Note 2)
Soldering temperature (Note 3)
Tsld
（Note 1）Tc : Case temperature (Frame heat radiation part temperature)
（Note 2）CW Operation : Continuous Wave Operation
（Note 3）Soldering temperature means soldering iron tip temperature while soldering.
ꢀꢀꢀꢀꢀꢀꢀ（The Power of soldering iron must be 50W or below.）
ꢀꢀꢀꢀꢀꢀꢀꢀSoldering position is 2mm apart from bottom edge of the case.(Immersion time: 5s)
■ꢀElectro-optical Characteristics of laser diode (Note 1)
(Tc=25℃(Note 1))
Parameter
Conditions
Symbol
Unit
Min.
-
Typ. Max.
mA
-
42
120
2.3
661
9.3
70
165
3.2
Threshold current
Operating current
Operating voltage
Wavelength
Ith
mA
V
-
-
I
op
Vop
652
8
666
11.5
nm
°
λp
Θ
Half Intensity Angle(Parallel)(Note 2,3)
Po = 90 mW
”
T
Θ
ΔΘ
ΔΘ
Rl
Half Intensity Angle(Perpendicular)(Note2,3)
13.5
-3
15.0 19.0
°
°
Beam Tilt Angle (Parallel) (Note 3)
-
-
-
+3
+3
”
T
Beam Tilt Angle (Perpendicular) (Note 3)
-3
°
Ripple (Note 4)
-20
+20
%
80mW
I(90mW)-I(10mW)
Differential efficiency
0.80
1.16
-
mW/mA
ηd
(Note 1) Initial value, Continuous Wave Operation
(Note 2) Angle of 50% peak intensity (Full angle at half-maximum)
Half intensity angle of parallel and perpendicular are to be within the pentagon
(Note 3) Parallel to the junction plane(X-Z plane)
Perpendicular to the junction plane(Y-Z plane)
(Note 4) Rl≡ΔP/P
ΔP:the maximum deviation of the far field pattern from its approximate curve
P:the peak of the approximate curve
sharp LDA-E5-4-16-A
3
SHARP [ SHARP ELECTRIONIC COMPONENTS ]
