SGM48753
CMOS Analog Switch
PACKAGE/ORDERING INFORMATION
SPECIFIED
TEMPERATURE
PACKAGE
DESCRIPTION
ORDERING
NUMBER
PACKAGE
MARKING
PACKING
OPTION
MODEL
RANGE
SGM48753YS16
XXXXX
SGM48753YS16G/TR
SGM48753YQS16G/TR
SGM48753YTS16G/TR
SGM48753YTQ16G/TR
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
-40℃ to +85℃
SOIC-16
SSOP-16
Tape and Reel, 2500
Tape and Reel, 3000
Tape and Reel, 4000
Tape and Reel, 4000
SGM48753
YQS16
XXXXX
SGM48753
SGM48753
YTS16
XXXXX
TSSOP-16
48753TQ
XXXXX
TQFN-3×3-16L
NOTE: XXXXX = Date Code and Vendor Code.
Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If
you have additional comments or questions, please contact your SGMICRO representative directly.
OVERSTRESS CAUTION
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed may cause permanent damage
to the device. Functional operation of the device at these or
any other conditions beyond those indicated in the operational
section of the specification is not implied. Exposure to
absolute maximum rating conditions for extended periods may
affect reliability.
VCC to GND.......................................................... -0.3V to 6V
Voltage into Any Terminal (1)................. -0.3V to (VCC + 0.3V)
Continuous Current into Any Terminal........................±20mA
Peak Current, X_, Y_, Z_
(Pulsed at 1ms, 10% duty cycle).................................±40mA
Junction Temperature.................................................+150℃
Storage Temperature Range........................-65℃ to +150℃
Lead Temperature (Soldering, 10s)............................+260℃
ESD Susceptibility
ESD SENSITIVITY CAUTION
This integrated circuit can be damaged by ESD if you don’t
pay attention to ESD protection. SGMICRO recommends that
all integrated circuits be handled with appropriate precautions.
Failure to observe proper handling and installation procedures
can cause damage. ESD damage can range from subtle
performance degradation to complete device failure. Precision
integrated circuits may be more susceptible to damage
because very small parametric changes could cause the
device not to meet its published specifications.
HBM.............................................................................3000V
MM.................................................................................200V
NOTE:
1. Voltages exceeding VCC or VEE on any signal terminal are
clamped by internal diodes. Limit forward-diode current to
maximum current rating.
RECOMMENDED OPERATING CONDITIONS
Supply Voltage Range........................................2.5V to 5.5V
Operating Temperature Range.......................-40℃ to +85℃
DISCLAIMER
SG Micro Corp reserves the right to make any change in
circuit design, specification or other related things if necessary
without notice at any time.
SG Micro Corp
www.sg-micro.com
DECEMBER 2014
2