Transient Voltage Suppressors - P4KE Series
Features
UNI
1. Halogen-free
2. Rohs compliant
3. Typical maximum temperature coefficient
BR
BR
4. ΔV =0.1%xV @25°C x ΔT
BI
5. Glass passivated Chip junction in P600 package
6. 400W peak pulse capadility at 10x1000μs waveform,repetition rate (duty
cycles):0.01%
7. Fast response time:typically less than 1.0ps from 0 Volts to BV min
8. Excellent clamping capability
9. Low incremental surge resistance
10. Typical IR less than 5μA above 11V
BI
Cathode
Anode
11. High temperature soldering guaranteed: 260°C/40 seconds / 0.375”,
\(9.5mm) lead length, 5lbs., (2.3kg)tension
12. Plastic package has underwriters laboratory flammability classification
94v-0
UNI
13. Matte Tin Lead–free plated
Applications
TVS devices are ideal for the protection of I/O interfaces,VCC bus and other vulnerable circuits used in telecom, computer,
industrial and consumer electronic applications.
Mechanical Characteristics
Rating
Symbol
PPPM
PD
Value
400
1.5
Units
Watts
Watts
Amps
Peak Pulse Power Dissipation by 10x1000μs test waveform
(Fig.1)(Note 1)
Steady State Power Dissipation on
inifinite heat sink at TL=75°C (Fig. 5)
Peak Forward Surge Current, 8.3ms Single Half Sine Wave
Unidirectional only (Note 2)
IFSM
40
Maximum Instantaneous Forward Voltage at 25A for
Unidirectional only (Note 3)
VF
3.5/5.0
-55°C to 175°C
6.0
V
Operating junction and Storage Temperature Range.
Typical Thermal Resistance Junction to Lead
T T
,
°C
J
STG
RuJL
RuJA
°C/W
°C/W
Typical Thermal Resistance Junction
to Ambient
100
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25°C per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 perminute maximum.
3. VF<3.5V for devices of VBR _< 200V and VF<5.0V for devices of VBR _> 201V.
Specifications are subject to change without notice.
Circuit Protection
System
Page:1
Please refer to http://www.ruilon.com for current information.