■
■
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
■
■
■
RSG
■
Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de
ELECTRONIC COMPONENTS
Änderungen vorbehalten / subject to change without notice
120W AC-DC Single Output Desktop
AS-120P series
Features :
3 pole AC inlet IEC320-C14
Built-in active PFC function, PF>0.95
Protections: Short circuit/ Over load/ Over voltage/Over temperature
3
High power density 5w/in
Fully enclosed plastic case
Approvals: UL/ CUL/ TUV/ CB/ CE
No load power consumption<0.75W@240VAC
ZCS/ZVS technology to reduce power dissipation
2 years warranty
TUV
Rheinland
Product Safety
R
geprUfre
Sicherheit
SPECIFICATION
MODEL
AS-120P-12
AS-120P-15
AS-120P-20
AS-120P-24
AS-120P-48
ORDER NO.
AS120P12R7B
AS120P15R7B
15V
AS120P20P1M
20V
AS120P24P1M
24V
AS120P48P1M
48V
DC VOLTAGE
Note.2 12V
RATED CURRENT
CURRENT RANGE
RATED POWER
8.4A
6.7A
6A
5A
2.5A
0~ 8.4A
100W
0 ~ 6.7A
100W
0 ~ 6A
0 ~ 5A
0 ~ 2.5A
120W
120W
120W
RIPPLE & NOISE (max.) Note.3 100mVp-p
100mVp-p
13.5 ~ 16.5V
200mVp-p
18 ~ 22V
200mVp-p
21.6 ~ 26.4V
240mVp-p
43.2 ~ 52.8V
11 ~ 13.5V
OUTPUT
VOLTAGE ADJ. RANGE
Fixed output by customer choose
VOLTAGE TOLERANCE Note.4 4.0%
4.0%
1.0%
3.0%
3.0%
1.0%
2.5%
2.0%
1.0%
2.0%
2.0%
1.0%
2.0%
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
Note.5 1.0%
Note.6 3.5%
3000ms, 80ms at full load
50ms/230VAC 16ms/115VAC at full load
HOLD TIME (Typ.)
VOLTAGE RANGE
90 ~ 264VAC 127 ~ 370VDC
47 ~ 63Hz
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
PF 0.95/230VAC
85.5%
PF 0.98/115VAC at full load
INPUT
87.5%
89.5%
90%
89%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT (max.)
1.4A/115VAC
120A/230VAC
<1mA / 240VAC
0.7A/230VAC
105 ~ 135% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
14 ~ 16.8V 22.5 ~ 28V 27 ~ 33.6V
Protection type : Shut down o/p voltage, re-power on to recover
90 15 (RTH2) Detect on heatsink of power transistor
OVER LOAD
53.3 ~ 67.2V
17 ~ 21V
PROTECTION
OVER VOLTAGE
OVER TEMPERATURE
Protection type : Shut down o/p voltage, re-power on to recover
0 ~ + 50 (Refer to output load derating curve)
20% ~ 90% RH non-condensing
WORKING TEMP.
WORKING HUMIDITY
-20 ~ +85 , 10 ~ 95% RH
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
ENVIRONMENT
0.03% / (0 ~ 50
)
10 ~ 500Hz, 2G 3AXES 10min./1cycle, period for 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 Approved
SAFETY STANDARDS
WITHSTAND VOLTAGE
I/P-O/P:4.25KVDC
SAFETY &
I/P-O/P:100M Ohms
ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION
HARMONIC CURRENT
Compliance to EN55022(CISPR22) class B, FCC part 15J class B
Compliance to EN61000-3-2,3
EMC
(Note. 7)
EMS IMMUNITY
LIFE
Compliance to EN61000-4-2,3,4,5,6,8,11, Light industry level, criteria A
Average life expectancy of 6 years (12 hours / day, 70% load, 115VAC)
MTBF
308.9K hrs min. MIL-HDBK-217F (25
)
OTHERS
DIMENSION
167*67*35mm (L*W*H)
0.52Kg; 30pcs/16.6Kg/1.1CUFT
PACKING
PLUG
Standard type R7B,P2M: 2.5 * 5.5 * 11mm, center positive for stock ; Other type available by customer requested
Standard type 120cm of SPT-1, 16Awg*2c for stock ; Other type available by customer requested
CONNECTOR
CABLE
1.All parameters are specified at 230VAC input, rated load, 25 70% RH. Ambient.
2.DC voltage: The output voltage set at point measure by plug terminal & 50% load.
3.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
4.Tolerence: includes set up tolerance, line regulation, load regulation.
NOTE
5.Line regulation is measured from low line to high line at rated load.
6.Load regulation is measured from 0% to 100% rated load.
7.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
RSG [ RSG ELECTRONIC COMPONENTS GMBH ]
