MICROCIRCUIT DATA SHEET
MN54ACTQ827-X REV 2A0
(Absolute Maximum Ratings)
(Note 1)
Supply Voltage (Vcc)
-0.5V to +7.0V
DC Input Diode Current (Iik)
Vi = -0.5V
-20 mA
+20 mA
Vi = Vcc +0.5V
DC Input Voltage (Vi)
-0.5V to Vcc +0.5V
DC Output Diode Current (Iok)
Vo = -0.5V
-20 mA
+20 mA
Vo = Vcc +0.5V
DC Output Voltage (Vo)
-0.5 to Vcc +0.5V
+50 mA
DC Output Source or Sink Current (Io)
DC Vcc or Ground Current per Output Pin (Icc or Ignd)
Storage Temperature (Tstg)
+50 mA
-65 C to + 150 C
+300 mA
DC Latch-Up Source or Sink Current
Junction Temperature (Tj)
CDIP
175 C
Note 1: Absolute maximum ratings are those values beyond which damage to the device may
occur. The databook specifications should be met, without exception, to ensure that
the system design is reliable over its power supply, temperature, and output/input
loading variables. National does not recommend operation of FACT TM circuits outside
databook specifications.
Recommended Operating Conditions
(Note 1)
Input Voltage (Vi)
Output Voltage (Vo)
0V to Vcc
0V to Vcc
Supply Voltage (Vcc)
4.5V to 5.5V
Minimum Input Edge Rate (Delta v/Delta t)
ACTQ Devices
Vin from 0.8V to 2.0V
Vcc @ 4.5V, 5.5V
125 mV/ns
Operating Temperature (Ta)
-55 C to + 125 C
Note 1: All commercial packaging is not recommended for applications requiring greater than
2000 temperature cycles from -40C to +125C.
3