®
RT7202K
Highly Integrated USB PD Type-C Controller for SMPS
General Description
Features
Protocols Supported
The RT7202K is a simple and yet flexible for multipurpose
of USB PD controller. By programming, it could operate
as a source or a sink.
USB PD 2.0 and 3.0 (PPS)
Other Proprietary Protocols
Highly Integrated
When used as a source, it could be used in an off-line
AC-DC converter, as it integrates shun regulator, constant
voltage (CV) and constant current (CC) control loop with
programmable reference voltage to meet the specification
of Programmable Power Supply (PPS) specification. When
combined with external buck or buck boost controller, it
could constitute aDCDC converter, such as a car charger
, and could also meet the PPS specification. When used
as a sink, it is simple, low cost, yet flexible to use to
request required power from a source. If using the
RT7202KD for a sink design, it has I2C interface and two
GPIOs for flexible use and could be easily controlled by
other MCU which plays a master role.
Embedded MCU with an Mask-ROM of 24kB, an
OTP-ROM of 8kB, and an SRAM of 2kB
Embedded BMC Transceiver
Wide VDD Operation Range : 3V to 22V
Built-in Shut Regulator for Constant-Voltage
and Constant-Current Regulation
Built-in 10-bit Analog-to-Digital Converter (ADC)
Programmable Cable Compensation
BLD Pin for Quick Discharge of Output Capacitor
(RT7202KD)
VDD Pin for Quick Discharge of Output Capacitor
(RT7202KE/KF/KH)
USBP Pin for Direct Drive of External Blocking
N-MOSFET
Ordering Information
Power-Saving Mode in Standby Mode
Protection
-
RT7202K
Programmed Firmware Code AABBX
AA : Application Code
BB : Model Code
Adaptive Over-Voltage Protection
Adaptive Under-Voltage Protection
Firmware-Programmable Over-Current Protection
X : Customer Approved Version Code
Package Type
QW : WQFN-16L 4x4 (W-Type)
(RT7202KD)
Applications
USB PDType-C Chargers/Adapters for Smart Phones,
S : SOP-10 (RT7202KE/KF/KH)
NBs, Tablets and All Other Electronics
Lead Plating System
USB PDExtension Cores with OfflineAC-DC Converters
G : Green (Halogen Free and Pb Free)
RT7202K Version
(Refer to Version Table)
Marking Information
For marking information, contact our sales representative
directly or through a Richtek distributor located in your
area.
Note :
Richtek products are :
RoHS compliant and compatible with the current require-
ments of IPC/JEDEC J-STD-020.
Suitable for use in SnPb or Pb-free soldering processes.
Copyright 2020 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS7202K-05 April 2020
www.richtek.com
1
RICHTEK [ RICHTEK TECHNOLOGY CORPORATION ]