欢迎访问ic37.com |
会员登录 免费注册
发布采购

RT6248B 参数 Datasheet PDF下载

RT6248B图片预览
型号: RT6248B
PDF下载: 下载PDF文件 查看货源
内容描述: [暂无描述]
分类和应用:
文件页数/大小: 17 页 / 274 K
品牌: RICHTEK [ RICHTEK TECHNOLOGY CORPORATION ]
 浏览型号RT6248B的Datasheet PDF文件第1页浏览型号RT6248B的Datasheet PDF文件第3页浏览型号RT6248B的Datasheet PDF文件第4页浏览型号RT6248B的Datasheet PDF文件第5页浏览型号RT6248B的Datasheet PDF文件第6页浏览型号RT6248B的Datasheet PDF文件第7页浏览型号RT6248B的Datasheet PDF文件第8页浏览型号RT6248B的Datasheet PDF文件第9页  
RT6248B  
Ordering Information  
RT6248B  
Marking Information  
MB= : Product Code  
YMDNN : Date Code  
MB=YM  
DNN  
Package Type  
QUF : UQFN-12HL 3x3 (FC) (U-Type)  
Lead Plating System  
G : Green (Halogen Free and Pb Free)  
UVP Option  
H : Hiccup  
Pin Configuration  
(TOP VIEW)  
PWM Operation Mode  
B : Forced-PWM  
Note :  
Richtek products are :  
12 11 10  
1
9
8
7
RoHS compliant and compatible with the current require-  
ments of IPC/JEDEC J-STD-020.  
6
BOOT  
LX  
EN  
5
VIN  
2
3
Suitable for use in SnPb or Pb-free soldering processes.  
4
PGND  
LX  
UQFN-12HL 3x3  
Functional Pin Description  
Pin No.  
Pin Name  
Pin Function  
Boot-strap pin. Supply high-side gate driver. Decouple this pin to LX pin with  
0.1F ceramic cap.  
1
BOOT  
2, 3  
4
LX  
Inductor pin. Connect this pin to the switching node of inductor.  
Power ground.  
PGND  
VIN  
5
Input pin. Decouple this pin to GND pin with at least 10F ceramic cap.  
Enable control. Pull this pin high to turn on the Buck. Do not leave this pin  
floating.  
6
EN  
Power good indicator. Open drain output when the output voltage is within 90%  
to 120% of regulation point.  
7
8
9
PGOOD  
AGND  
VCC  
Analog ground. Connect AGND to a clean inner GND point with separate trace.  
5V linear regulator output for internal control circuit. A capacitor (typical 1F)  
should be connected to PGND. Don’t connect to external Load.  
Output feedback pin. Connect this pin to the center point of the output resistor  
divider to program the output voltage.  
10  
11  
12  
FB  
Bypass input for the internal LDO. BYP is externally connected to the output of  
switching regulator. When the BYP voltage rises above the bypass switch turn-on  
threshold, the LDO regulator shuts down and the VCC pin is connected to the  
BYP pin through an internal switch. But when BYP pin is not used, it should be  
connected to ground.  
BYP  
ILMT  
Current limit setting pin. The current limit is set to 8A, 10A or 12A when this pin is  
pull low, floating or pull high respectively.  
Copyright 2018 Richtek Technology Corporation. All rights reserved.  
©
is a registered trademark of Richtek Technology Corporation.  
www.richtek.com  
2
DS6248B-01 May 2018