RT5701
Parameter
Symbol
Test Conditions
Min
Typ
Max
Unit
Set-Up Time for a Repeated
START Condition
tSU;STA
0.6
--
--
s
Data Hold Time
tHD;DAT
tSU;DAT
0
--
--
0.9
--
s
Data Set-Up Time
100
ns
Set-Up Time for STOP
Condition
tSU;STO
0.6
1.3
20
20
2
--
--
--
--
--
--
--
s
s
Bus Free Time between a
STOP and START Condition
tBUF
tr
Rising Time of both SDA and
SCL Signals
300
300
--
ns
Falling Time of both SDA and
SCL Signals
tf
ns
SDA and SCL Output Low Sink
Current
IOL
SDA or SCL Voltage = 0.4V
mA
Note 1. Stresses beyond those listed “Absolute Maximum Ratings” may cause permanent damage to the device. These are
stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in
the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may
affect device reliability.
Note 2. θJA is measured at TA = 25°C on a high effective thermal conductivity four-layer test board per JEDEC 51-7. θJC is
measured at the exposed pad of the package.
Note 3. Devices are ESD sensitive. Handling precaution is recommended.
Note 4. The device is not guaranteed to function outside its operating conditions.
Copyright 2015 Richtek Technology Corporation. All rights reserved.
©
is a registered trademark of Richtek Technology Corporation.
DS5701-01 July 2015
www.richtek.com
9
RICHTEK [ RICHTEK TECHNOLOGY CORPORATION ]
