欢迎访问ic37.com |
会员登录 免费注册
发布采购

RT1650WSC 参数 Datasheet PDF下载

RT1650WSC图片预览
型号: RT1650WSC
PDF下载: 下载PDF文件 查看货源
内容描述: [Wireless Power Receiver Compliant with WPC]
分类和应用: PC无线
文件页数/大小: 26 页 / 1566 K
品牌: RICHTEK [ RICHTEK TECHNOLOGY CORPORATION ]
 浏览型号RT1650WSC的Datasheet PDF文件第2页浏览型号RT1650WSC的Datasheet PDF文件第3页浏览型号RT1650WSC的Datasheet PDF文件第4页浏览型号RT1650WSC的Datasheet PDF文件第5页浏览型号RT1650WSC的Datasheet PDF文件第7页浏览型号RT1650WSC的Datasheet PDF文件第8页浏览型号RT1650WSC的Datasheet PDF文件第9页浏览型号RT1650WSC的Datasheet PDF文件第10页  
RT1650  
Operation  
MCU Based Digital Circuit  
Mode Control  
RT1650 is a SoC (System on Chip) produce, which  
contains system level feature to control the  
communication with power transmitter, power  
calculation and GPIO. The firmware can be  
programmed into OTP (One Time Programmable)  
memory, so that user can discuss the features with  
RICHTEK, and custom some functions and GPIO  
behavior. To flexibly control whole functions, this chip  
embedded a MTP (Multiple Time Programmable)  
memory to save various setting and parameters. The  
external host can real-time read some power  
information via I2C interface.  
Mode control is using for the default mode, wireless  
mode, adapter mode and disable mode selection.  
Adapter Detection  
In the default mode and adapter mode, adapter  
detection block control the ADEN pin to follow the  
VADD-5V to avoid the PMOS damaged.  
FSK Decoder  
This block analysis the frequency from the AC1 and  
AC2. This information can use for the FSK (Frequency  
Shift Key) decode to the WPC medium power standard.  
This information also can use for the power loss  
calculation of the resonant tank.  
OVP (Over Voltage Protection)  
The OVP function using to protect the abnormal power  
signal to let the RT1650 damaged. Once the VRECT  
exceeds 11.5V, this block will drive the CLAMP MOS to  
avoid the over voltage damage.  
Packet Control  
This block build up the WPC standard 2kHz bi-phase  
encoding scheme with the asynchronous serial format  
and the packet structure. This block control the  
open-drain MOS to achieve the ASK (Amplitude Shift  
Key) communication.  
OTP (Over Temperature Protection)  
The OTP function shuts down the linear regulator  
operation when the junction temperature exceeds  
150C. Once the junction temperature cools down by  
around 20C, the receiver will automatically resume  
operating.  
Synchronous Rectifier Control  
This block detect the zero-cross of the AC1 and AC2  
voltage then control the high-side and low-side MOS of  
the rectifier. RT1650 provide the Asynchronous,  
Half-synchronous and Full-synchronous control to  
optimize the rectifier efficiency.  
Copyright © 2015 Richtek Technology Corporation. All rights reserved.  
is a registered trademark of Richtek Technology Corporation.  
www.richtek.com  
6
DS1650-00 July 2015