D5000M SPECIFICATIONS (typical at +25°C and nominal power supply unless otherwise noted)
D5100M Voltage Inputs
Analog
• Voltages: ±100mV, ±1V, ±5V, ±10V, ±100Vdc.
• Resolution: 0.01% of FS (4 digits).
• Accuracy: ±0.02% of FS max.
• Zero drift: ±1 count max (autozero).
• Span tempco: ±50ppm/°C max.
• Input burnout protection to 250Vac .
• Input impedance: ≤ ±1V input =100MΩ min.
≥ ±5V input =1MΩ min.
• Four channel analog input.
• Maximum CMV, input to output at 60Hz: 500V rms.
• Leakage I, input to output at 115Vrms, 60Hz: <2µA rms.
• 15 bit measurement resolution.
• 8 conversions per second.
• Common mode rejection: 100dB at 50/60Hz.
• Autozero & autocalibration—no adjustment pots.
Digital
D5200M Current Input
• 8-bit CMOS microcomputer.
• Current: 4-20mAdc.
• Digital scaling, linearization and calibration.
• Nonvolatile memory eliminates pots and switches.
• Small and large signal digital filtering with user selectable
time constants.
• Resolution: 0.04% of FS.
• Accuracy: 0.04% of FS.
• Zero drift: ±1 count max (autozero).
• Span tempco: ±50ppm/°C max.
• Voltage drop: 1.0V max.
Communications
• Communications in ASCII via RS-232C, RS-485 ports.
• Selectable baud rates: 300, 600, 1200, 2400, 4800,
9600, 19200, 38400, 57600, 115200.
D5300M Thermocouple Inputs
• Thermocouple types: J, K, T, E (factory set).
• NRZ asynchronous data format; 1 start bit, 7 data bits,
1 parity bit and 1 stop bit.
• Ranges: J = -200°C to +760°C
T = -200°C to +400°C
K = -150°C to +1250°C E = -100°C to +1000°C
• Resolution: ±1°.
• Parity: odd, even, none.
• Overall Accuracy (error from all sources) from 0 to +40°C
ambient: ±1.0 °C .
• Input impedance: 100MΩ min.
• Lead resistance effect: <20µV per 350Ω.
• User selectable channel address.
• Modbus RTU or DGH ASCII communications protocol.
• Up to 247 multidrop modules per host serial port.
• Communications distance up to 4,000 feet (RS-485).
• Transient suppression on RS-485 communications lines. • Open thermocouple and overrange indication.
• Input burnout protection to 250Vac.
• Automatic cold junction compensation and linearization.
• Communications error checking via checksum.
• All communications setups stored in EEPROM.
Power
D5450M Thermistor Inputs
• Thermistor types: 2252Ω at 25°C.
• Range: -0°C to +100°C.
• Resolution: 0.01°C or F.
• Accuracy: ±0.1°C.
Requirements: Unregulated +10V to +30Vdc, 0.75W max
Protected against power supply reversals.
Environmental
Temperature Range: Operating -25°C to +70°C.
Storage -25°C to +85°C.
Relative Humidity: 0 to 95% noncondensing.
• Input protection to 30Vdc .
Warranty
D5000M Mechanicals and Dimensions
Case: ABS with captive hardware.
12 months on workmanship and material.
Connectors: Screw terminal barrier plug (supplied).
Replace with Phoenix MSTB 1.5/10 ST 5.08 or equivalent.
Specifications are subject to change without notice.
NOTE: Spacing for mounting screws = 2.700" (6.858 cm).
Screw threads are 6 X 32.
RHOPOINT [ RHOPOINT COMPONENTS ]
