X8200
X8200HP
Synthesised Radio Modem
Advanced Menu: Display Advanced Menu
.
Return to Main Menu
Display Main Menu.
Modem ID
Baud
Parity
Odd/Even
RF Power
Key Transmitter
RF Channel
RSSI
User defined ID number.
Baud Rate 1.2K to 115.2K
Enable Parity.
TX Priority
Message Tag
FEC
Data transmitted priority
Adds Ident. No. to Data
Forward Error Correction
Select Parity.
Set level of RF Power.
Switch on Transmitter
Set RF Frequency.
Bar Graph of Rx Signal
Set the Receiver Sensitivity
Slow/Fast
Enables Modem Address.
Packetise Data
Data is formed into packets
with error detections and
Acknowledgments. Connect
CTS to RTS on Host.
Sets number of retries.
Sets packet size. 64-1024
Data is stored until polled.
Allows distant Modem to
change settings.
Sensitivity
Comms Speed
Address Mode
Number of Retries
Packet Size
Logger Mode
AT Enable AT Instr AT instruction are enabled.
Enable Remote Access
Restore Defaults Set Factory Defaults.
Exit without Save Return without saving
operation without saving
settings.
Access Remote Modem Displays settings of remote
Modem with ID on AT Path.
Engage Repeater Path
Set Repeater Path
Enable repeater path.
Sets AT Path M01 to M16.
Save & Exit
Return to Modem and save
Settings.
Advanced Menu
The horizontal arrows are used to select the Advanced Menu.
Modem ID Number
Each modem in a network can be given an individual ID number between 0 and 99
This is used for:
Remote Access Menu
Modem Addressing
Repeater Function
Packet Data Function
Baud Rate Settings
A baud rate is entered by moving the cursor under the current setting with the vertical arrow
keys. Then by pressing the horizontal keys the value will change:
BAUD RATE
115.2K
57.6K
38.4K
19.2K
9.6K
4.8K
2.4K
1.2K
Parity On/Off
DS8200-2 April ’07
©2007 RF Solutions Ltd, www.rfsolutions.co.uk
Page 9
RFSOLUTIONS [ RFSOLUTIONS.LTD ]
