SF2059B-1
• Low Insertion Loss
• 5.0 x 7.0 mm Surface-Mount Case
• Complies with Directive 2002/95/EC (RoHS)
137.50 MHz
SAW Filter
Pb
Absolute Maximum Ratings
Rating
Value
Units
Maximum Incident Power in Passband
+10
dBm
Maximum DC Voltage Between any 2 Terminals
Storage Temperature Range
30
VDC
°C
-40 to +85
Maximum Soldering Temperature
265°C for 10 s
SMP-03
Electrical Characteristics
Characteristic
Sym
C
Notes
Min
Typ
Max
Units
Nominal Center Frequency
f
137.50
MHz
1
Minimum Insertion Loss
IL
BW
BW
8.3
9.1
dB
1 dB Bandwidth
1, 2
1
0.80
-40
0.86
1.0
1
3
MHz
3 dB Bandwidth
Amplitude Ripple, 137.1 to 137.9 MHz
40 dB Bandwidth
0.85
1.3
7.0
dB
P-P
1, 2
1
MHz
°C
Operating Temperature Range
Input and Output Impedance
Case Style
T
+85
A
L-C Match to 50 ohms
SMP-03 7 x 5 mm Nominal Footprint
RFM SF2059B-1 YYWWS##
5
Lid Symbolization (YY=year, WW=week, S=shift) See note 4
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1.
Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance
matching to 50 Ω and measured with 50 Ω network analyzer.
2.
3.
4.
5.
Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
The design, manufacturing process, and specifications of this filter are subject to change.
Tape and Reel Standard Per ANSI / EIA 481.
Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port
2, so that the filter must always be installed in one direction per the circuit design.
US and international patents may apply.
RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
©Copyright 2009, RF Monolithics Inc.
6.
7.
8.
www.RFM.com E-mail: info@rfm.com
©2009 by RF Monolithics, Inc.
Page 1 of 5
SF2059B-1 - 1/16/09