®
SF2046B
•
•
•
•
•
Designed for 802.16 and WIMAX Receiver IF Application
Low Insertion Loss
5.0 X 7.0 mm Surface-Mount Case
Differential Input and Output
456.44 MHz
SAW Filter
Complies with Directive 2002/95/EC (RoHS)
Pb
Absolute Maximum Ratings
Rating
Value
+13
Units
dBm
VDC
°C
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
30
-40 to +85
Suitable for lead-free soldering - Max Soldering Profile
260°C for 30 s
SMP-03
Electrical Characteristics
Characteristic
Sym
Notes
Min
Typ
Max
Units
Nominal Center Frequency
f
1
456.44
MHz
C
Insertion Loss
8.0
6.0
6.5
9.1
dB
Bandwidth, 2dB
5.22
MHz
Rejection
3 dB Bandwidth nominal, specify
40 dB min, Frequency lower
40 dB min, Frequency upper
449.09
MHz
464.79
Bandwidth, 40 dB min (Ultimate Rejection)
13.0
108
1.0
Group Delay (Across 1 dB frequencies)
315
2.5
3.9
nsec pk-pk
dBpk-pk
dB
Amplitude Ripple (Across 453.83 to 459.05) -15 to +85°C
Amplitude Ripple (Across 453.83 to 459.05) -40 to -15
Reflected Wave Signal Suppression
1.0
1 usec after main pulse
20
30
40
2 usec after main pulse
3 usec after main pulse
Input Impedance (Differential)
Output Impedance (Differential)
Temperature
200
200
Ohms
Ohms
Operating
Storage
-40
-40
85
85
°C
Case Style
SMP-03 7 x 5 mm Nominal Footprint
RFM SF2046B YYWWS##
Lid Symbolization (YY=year, WW=week, S=shift, ##=sequence code)
See note 4
Notes:
1.
Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to
50 W and measured with 50 W network analyzer.
2.
3.
4.
5.
Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
"LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes."
The design, manufacturing process, and specifications of this filter are subject to change.
Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that
the filter must always be installed in one direction per the circuit design.
6.
7.
8.
9.
US and international patents may apply.
RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc.
©Copyright 1999, RF Monolithics Inc.
Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc.
RFM Europe
Phone: (972) 233-2903
Phone: 44 1963 251383
Fax: (972) 387-8148
Fax: 44 1963 251510
E-mail: info@rfm.com
http://www.rfm.com
SF2046B-020707
Page 1 of 3
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
RFM [ RF MONOLITHICS, INC ]
