SF1141B-4
• Designed for SDARS IF Receiver
• Low Insertion Loss
• 5.0 X 7.0 mm Surface-Mount Case
• Differential Input and Output
• Complies with Directive 2002/95/EC (RoHS)
75.00 MHz
SAW Filter
Pb
Absolute Maximum Ratings
Rating
Value
+10
Units
dBm
VDC
°C
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
30
-40 to +85
Max Soldering Profile
265°C for 10 s
SMP-03-S
Electrical Characteristics
Characteristic
Sym
Notes
Min
Typ
Max
Units
Nominal Center Frequency
f
75.000
12.5
MHz
dB
C
1
Passband
Insertion Loss at fc
1dB Passband
IL
16.0
BW
±6.35
±7.43
MHz
1
1, 2
Fast Amplitude Ripple over fc ±6.35 MHz
Group Delay Variation over fc ±6.35 MHz
fc-100 to fc-18.8 MHz
1.5
dB
P-P
P-P
GDV
75
45
45
36
45
200
ns
Rejection
40
37
30
40
-40
fc-18.8 to fc-10.95 MHz
1, 2, 3
dB
fc+10.95 to fc+18.8 MHz
fc+18.8 to fc+100 MHz
Operating Temperature Range
T
1
6
+85
°C
A
Differential Input and Output Impedance
Case Style
250 ohms
SMP-03-S 7 x 5 mm Nominal Footprint
RFM SF1141B-4 YYWWS
Lid Symbolization (YY=year, WW=week, S=shift) See note 4
Electrical Connections
Connection
Terminals
Port 1 Hot
10
Port 1 Ground Return or Hot
1
Port 2 Hot
5
Port 2 Ground Return or Hot
6
Case Ground
All Others
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with
impedance matching to 50 Ω and measured with 50 Ω network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. The design, manufacturing process, and specifications of this filter are subject to change.
4. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port
1 and Port 2, so that the filter must always be installed in one direction per the circuit design.
5. US and international patents may apply.
6. ©Copyright 1999, RF Monolithics Inc.
www.RFM.com
E-mail: info@rfm.com
Page 1 of 3
©2008 by RF Monolithics, Inc.
SF1141B-4 - 3/28/08