RF3417E
• Ideal Front-End Filter for European Wireless Receivers
• Low-Loss, Coupled-Resonator Quartz Design
• Simple External Impedance Matching
315.00 MHz
SAW Filter
• Complies with Directive 2002/95/EC (RoHS)
Pb
The RF3417E is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide
front-end selectivity in 315.0 MHz receivers. Receiver designs using this filter include superhet with 10.7 MHz
or 500 kHz IF, direct conversion and superregen. Typical applications of these receivers are wireless remote-
control and security devices operating in Europe under ETSI I-ETS 300 220, in Germany under FTZ 17 TR
2100, in the United Kingdom under DTI MPT 1340 (for automotive only), in France under PTT Specifications
ST/PAA/TPA/AGH/1542, and in Scandinavia.
This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater
than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF. RFM’s
advanced SAW design and fabrication technology is utilized to achieve high performance and very low loss
with simple external impedance matching (not included).
SM3030-6 Case
3.0 x 3.0
Electrical Characteristics
Characteristic
Sym
Notes
Minimum
Typical
Maximum
Units
f
314.900
315.100
MHz
dB
Center Frequency @ 25°C
Insertion Loss
Absolute Frequency
1, 2, 3
1
315.00
1.8
C
IL
2.5
3 dB Bandwidth
BW
525
600
675
1, 3
1, 3
kHz
kHz
3
1 dB Bandwidth
Rejection
BW
450
1
10 - 275 MHz
275 - 306 MHz
306 - 313.2 MHz
40
40
25
7
60
45
30
15
15
30
17
45
55
1, 3, 10, 11
313.2 - 314.2 MHz
315.8 - 317 MHz
317 - 321.8 MHz
321.8 - 326 MHz
326 - 355 MHz
12
25
12
37
50
dB
355 - 1000 MHz
2
Temperature
Freq. Temp. Coefficient
FTC
3, 4
0.032
ppm/°C
°C
Turnover Temperature
Frequency Aging
To
3, 4
5
10
40
Absolute Value during the First Year
Input Z = R /C
|fA|
<±10
ppm/yr
Z
3.7kΩ // 2.03pF
5.4kΩ // 2.17pF
IN
IN IN
IN
Impedance @ f
1
C
Output Z
= R
/C
Z
OUT
OUT OUT
OUT
Lid Symbolization (in addition to Lot and/or Date Codes)
696 // YWWS
Standard Reel Quantity
Standard Reel Quantity
7 Inch Reel
500 Pieces/Reel
3000 Pieces/Reel
9
13 Inch Reel
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 Ω test system with
VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, f . Note that insertion loss and band-
c
width are dependent on the impedance matching component values and quality.
2. The frequency f is defined as the midpoint between the 3dB frequencies.
c
3. Where noted, specifications apply over the entire specified operating temperature range of -40 to 90°C.
4. The turnover temperature, T , is the temperature of maximum (or turnover) frequency, f . The nominal frequency at any case temperature, T , may
O
o
c
2
be calculated from: f = f [1 - FTC (T - T ) ].
o
o
c
5. Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures
above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
6. The design, manufacturing process, and specifications of this device are subject to change without notice.
7. One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
8. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
9. Tape and Reel Standard for ANSI / EIA 481.
10. These values are attainable by using the optional pin out.
11. Typical rejection is defined as the typical rejection at the worst frequency in the band.
www.RFM.com E-mail: info@rfm.com
©2009 by RF Monolithics, Inc.
Page 1 of 4
RF3417E - 2/10/09
RFM [ RF MONOLITHICS, INC ]
