RF3336E
•
•
•
•
Front-End Filter for European Wireless Receivers
Low-Loss, Coupled-resonator Quartz Design
Simple External Impedance Matching
Complies with Directive 2002/95/EC (RoHS)
Pb
868.35 MHz
SAW Filter
The RF3336E is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide
front-end selectivity in 868.35 MHz receivers. Receivers using this filter include superheterodynes with
10.7 MHz or 500 kHz IFs, direct conversion receivers and superregenerative receivers. Typical applications
of these receivers include wireless remote-control and security devices operating in Europe under ETSI I-ETS
300 220. This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically
greater than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF. RFM’s
advanced SAW design and fabrication technology is utilized to achieve high performance and very low loss
with simple external impedance matching.
SM3030-6 Case
3.0 x 3.0
Electrical Characteristics
Characteristic
Center Frequency @ 25°C
Insertion Loss
3 dB Bandwidth
10 - 700 MHz
700 - 830 MHz
830 - 850 MHz
Attenuation:
(relative to ILmin)
850 - 864.4 MHz
870.4 - 877.4 MHz
877.4 - 882.4 MHz
882.4 - 900 MHz
900 - 1000 MHz
Temperature
Frequency Aging
Impedance @ f
C
Freq. Temp. Coefficient
Absolute Value during the First Year
Z
IN
= R
IN
|| C
IN
Z
OUT
= R
OUT
|| C
OUT
Reel Size 7 Inch
Reel Size 13 Inch
FTC
|fA|
Z
IN
Z
OUT
3, 4
5
1
1, 3
Absolute Frequency
Sym
f
C
IL
BW
3
Notes
1, 2, 3
1, 3
1, 2, 3
Minimum
Typical
868.35
2.5
Maximum
4.0
900
Units
MHz
dB
kHz
500
50
40
35
20
21
15
28
40
650
55
45
40
25
26
19
35
45
0.032
<±10
dB
ppm/°C
2
ppm/yr
55
Ω
|| 23.9 pF
53
Ω
|| 20.2 pF
700 || YWWS
500 Pieces/Reel
3000 Pieces/Reel
Lid Symbolization (in addition to Lot and/or Date Codes)
Standard Reel Quantity
9
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1.
Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50
Ω
test system with
VSWR
≤
1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, f
c
. Note that insertion loss and band-
width and passband shape are dependent on the impedance matching component values and quality.
The frequency f
c
is defined as the midpoint between the 3dB frequencies.
Where noted specifications apply over the entire specified operating temperature range of -40 to 90°C.
The turnover temperature, T
O
, is the temperature of maximum (or turnover) frequency, f
o
. The nominal frequency at any case temperature, T
c
, may
be calculated from: f = f
o
[1 - FTC (T
o
- T
c
)
2
].
Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures
above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
The design, manufacturing process, and specifications of this device are subject to change.
One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
Tape and Reel Standard for ANSI / EIA 481.
2.
3.
4.
5.
6.
7.
8.
9.
www.RFM.com E-mail: info@rfm.com
©2008-2010 by RF Monolithics, Inc.
Page 1 of 3
RF3336E - 10/28/10
RFM [ RF MONOLITHICS, INC ]
