AE314
(Preliminary)
E-pHEMT MMIC
Product Features
Application
• Low Noise Amplifier for
CATV, Satellite
• Low Noise Figure
• Higher Gain
• Cable Modem
• Higher linearity
• FTTH (G-PON, GE-PON)
• Optical node
• SOT89 SMD Type package
• Higher productivity
• Lower manufacturing cost
• -64dBc CSO 135 Channels @ +20dBmV/ch
• -74dBc CTB 135 Channels @ +20dBmV/ch
• -82dBc XMD 135 Channels @ +20dBmV/ch
• Pb-free/RoHS compliant
Package : SOT-89
Description
AE314 is designed as low cost drive amplifiers for many applications including FTTH, CATV System.
This MMIC is based on Gallium Arsenide Enhancement Mode pHEMT which shows low current draw and very low noise.
The data in this spec sheet is valid only for 75 ohm application.
◎ Specifications (50MHz~2200MHz)
UNIT
MIN
TYP
50 ~ 2200
21.3
19.2
2.5
MAX
Condition
PARAMETER
MHz
Frequency
At 500MHz
dB
Gain
At 2000MHz
Gain Flatness
Input Return Loss
Output Return Loss
Output IP3
dB
dB
-8
-4.3
-3.5
-8
dBm
dBm
dB
33
19
36
At 1000MHz/+10dBm 2tone
At 1000MHz
22
1dB Compression Point
Noise Figure
2
3
dBc
dBc
dBc
mA
-64
135 channel, +20dBmV/ch
135 channel, +20dBmV/ch
135 channel, +20dBmV/ch
Vdd = 5.0V
CSO
-74
30 ~ 870MHz
CTB
-82
XMOD
100
DC Current
NOTE
1. Test conditions unless otherwise noted. Ta=25℃, Vdd=+5V, 75Ω system
2. OIP3 measured with 2 tones at an output power of +10dBm/tone separated by 1MHz, Test Freq = 1000MHz
Absolute Minimum and Maximum Ratings
UNIT
VDC
℃
MIN
TYP
MAX
+5.5
+85
PARAMETER
Device Voltage
+5
-40
-40
Operating Temperature
Storage Temperature
+150
℃
▪ Tel : 82-31-250-5011
▪ rfsales@rfhic.com
▪ All specifications may change without notice.
▪ Version 0.3
RFHIC [ RFHIC ]
