FM24CL16
Electrical Specifications
Absolute Maximum Ratings
Symbol
Description
Ratings
-1.0V to +5.0V
-1.0V to +5.0V
and VIN < VDD+1.0V
-40°C to + 125°C
300° C
VDD
VIN
Power Supply Voltage with respect to VSS
Voltage on any pin with respect to VSS
TSTG
TLEAD
VESD
Storage Temperature
Lead temperature (Soldering, 10 seconds)
Electrostatic Discharge Voltage
- Human Body Model (JEDEC Std JESD22-A114-B)
- Machine Model (JEDEC Std JESD22-A115-A)
Package Moisture Sensitivity Level
4kV
300V
MSL-1
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This
is a stress rating only, and the functional operation of the device at these or any other conditions above those
listed in the operational section of this specification is not implied. Exposure to absolute maximum ratings
conditions for extended periods may affect device reliability.
DC Operating Conditions (TA = -40° C to + 85° C, VDD =2.7V to 3.65V unless otherwise specified)
Symbol
VDD
Parameter
Main Power Supply
Min
2.7
Typ
Max
3.65
Units
V
Notes
IDD
VDD Supply Current
@ SCL = 100 kHz
@ SCL = 400 kHz
@ SCL = 1 MHz
1
75
200
450
µA
µA
µA
µA
µA
µA
V
ISB
ILI
ILO
VIH
VIL
VOL
Standby Current
1
±1
±1
2
3
3
Input Leakage Current
Output Leakage Current
Input High Voltage
Input Low Voltage
Output Low Voltage
@ IOL = 3.0 mA
0.7 VDD
-0.3
VDD + 0.5
0.3 VDD
V
0.4
V
RIN
WP Input Resistance (WP)
For VIN = VIL (max)
For VIN = VIH (min)
50
1
5
4
KΩ
MΩ
V
VHYS
Input Hysteresis (Does not apply to WP)
0.05 VDD
Notes
1. SCL toggling between VDD-0.3V and VSS, other inputs VSS or VDD-0.3V.
2. SCL = SDA = VDD. All inputs VSS or VDD. Stop command issued.
3.
VIN or VOUT = VSS to VDD. Does not apply to pins with pull down resistors.
4. This parameter is characterized but not tested.
5. The input pull-down circuit is strong (50KΩ) when the input voltage is below VIL and much weaker (1MΩ)
when the input voltage is above VIH.
Rev 3.3
Nov. 2005
Page 8 of 13