EW
N
24 April 2007
Radiometrix
Hartcran House, 231 Kenton Lane, Harrow, HA3 8RP, England
Tel: +44 (0) 20 8909 9595, Fax: +44 (0) 20 8909 2233
RPM2A
UHF Radio Packet Modem
The UHF Radio Packet Modem (RPM2A) is a low cost intelligent radio packet
modem that enables a two way radio network/link to be simply implemented between
a number of digital devices. The RPM2A uses addressable data packets with error
checking, packet acknowledgements and retransmissions to achieve a reliable
transparent wireless data link. Built for ease of use and rapid installation, the serial
interface ensures direct connection to microprocessors or to RS232 port via RS232
driver while remote configuration enables post installation setup of the modem.
Features
point-to-
Addressable point-to-point
Point-to-
Point-to-Multipoint and broadcast modes
Inverted RS232 interface at 5V or 3VCMOS level
600-
DTE speed 600-115200bps
Overall throughput:
Single 5V or 3V supply
15mA during data streaming at maximum rate
Flow control – Hardware (CTS), None0
Available on 433.92MHz or 434.42MHz
Usable range up to 300m
Built-
Built-in command line configuration
Built-
Built-in RF link diagnostics
over-
Remote over-air unit configuration
Low operating current, Auto standby mode
220-
489-
Conforms to European ETSI EN 300 220-3 and EN 301 489-3
Dimensions: 39mm X 23mm X 10mm
with
17kbps with ACK
28kbps without ACK
Figure 1: RPM2A-914-17
Applications
Telemetry and telecontrol
EPOS equipment, barcode scanners, belt clip printers, stock control, job allocation
barcode
Remote data acquisition system, data loggers
In-
In-building, environmental monitoring and control systems
High-
High-end security and alarm signalling
Automated Monitoring and Control Systems
Fleet management, vehicle data acquisition
Radiometrix Ltd.
UHF FM Radio Packet Modem
page 1
RADIOMETRIX [ RADIOMETRIX LTD ]
