Ordering Information
Standard frequency setup for 4 channel MTX3 radios uses these default channels:
Part no.
Frequency
MTX3-869-10-SAL
MTX3-869-10
MTX3-869-10-5mW
CH0: 869.2125, CH1-3: 869.2375MHz (for Social Alarm use)
868 – 870 MHz
868 – 870 MHz (with 5mW RF power)
Alternatively, the MTX3 can be supplied as a single frequency module with factory set channel (like the
NTX3B or similar unit). In this case all channels are supplied programmed to the same frequency.
Part no.
MTX3-869.2125-10
MTX3-869.2375-10
Frequency
CH0 - 3: 869.2125MHz
CH0 - 3: 869.2375MHz
Note: Also available on the other UHF band frequencies, including 915MHz or 433 (MTX2)
Matching COR3 receiver
Part no.
COR3-869-5-SAL
Frequency
Module mounting
Vertical Mounting,
Parallel pins
Pins
RF, RFGND, RSSI, GND, VCC,
AF, RXD, P0/PGM
CH0: 869.2125, CH1-
3: 869.2375MHz
CH0: 869.2125, CH1-
3: 869.2375MHz
868-870MHz
COR3-869-5-SAL-H
COR3-869-5
Horizontal Mounting,
Perpendicular pins
Vertical Mounting,
Parallel pins
RF, RFGND, RSSI, GND, VCC,
AF, RXD, P0/PGM
RF, RFGND, RSSI, GND, VCC,
AF, RXD, P3, P2, P1, P0/PGM
Radiometrix Ltd
MTX3 Data Sheet
page 9
RADIOMETRIX [ RADIOMETRIX LTD ]
