Displays
ANDpSi121GA0S-HB-KIT
Connector Pin Assignment for Interface
CN1 Input Signal (see Notes below)
DF19L-20P-1H / Hirose Electric Co., Ltd.
Terminal
Symbol
Function
Power Supply: +3.3V
No.
V
1
3
DD
V
2
Power Supply: +3.3V
Ground
DD
V
SS
V
4
6
8
Ground
SS
5
7
RxIN0- Neg. LVDS differential data input (R0-R5, G0)
RxIN0+ Pos. LVDS differential data input (R0-R5, G0)
V
Ground
SS
Recommended Inverter:
RxIN1- Neg. LVDS differential data input (G1-G5, B0-B1)
RxIN1+ Pos. LVDS differential data input (G1-G5, B0-B1)
9
V
10
Ground
RxIN2- Neg. LVDS differential data input (B1-B5,HS,VS,DE)
12 RxIN2+ Pos. LVDS differential data input (B1-B5,HS,VS,DE)
SS
Block Diagram
11
13
15
17
V
Ground
SS
14
16
CLK- Clock Signal (-)
CLK+ Clock Signal (+)
V
Ground
SS
U/D
Vert. Rev. (“L” level or Open; Normal, “H” level: Rev.)
Horiz. Rev. (“L” level or Open; Normal, “H” level:
18
20
L/R
Rev.)
V
19
Ground
Ground
SS
V
SS
CN2 CCFL Power Source
BHR-04VS-1/Japan Solderless Terminal Mfg. Co., Ltd
Terminal
Symbol
Function
No.
1
VFLH1
VFLH2
NC
CCFL Power Supply (High Voltage)
CCFL Power Supply (Low Voltage)
Non Connection (open)
1) Drivers are fabricated on the LCD glass
2
3
4
VFLL
CCFL Power Supply (Low Voltage)
2) Connector
s
Notes:
CN1: DF19L-20P-1H / Hirose Electric Co., Ltd.
Please connect GND pin to ground. Don’t use it as no-connect nor
connection with high impedance. NC terminal should be open. Take
away terminal No. 3 of the mating connector. If does not take away, it
may cause smoke burn of electrical parts by high voltage.
Mating Connector - DF19G-20S-1F (FPC) /
DF19G-20S-1C (Cable)
CN2: BHR-04VS-1/Japan Solderless Terminal Mfg. Co., Ltd.
Mating Connector - SM04(4.0)B-BHS-1 / JST
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel:408.523.8216 • Fax:408.733.1287 • sales@purdyelectronics.com
4
7/27/07
www.purdyelectronics.com
PURDY [ PURDY ELECTRONICS CORPORATION ]
