LYT0002/0004-0006
Absolute Maximum Ratings(1,5)
DRAIN Pin Voltage..............................................-0.3 V to 700 V Notes:
Peak DRAIN Pin Current (LYT0002) .............. 200 mA (375 mA)(2) 1. All voltages referenced to SOURCE, TA = 25 °C.
Peak DRAIN Pin Current (LYT0004) .............. 400 mA (750 mA)(2) 2. The higher peak DRAIN current is allowed if the DRAIN
Peak DRAIN Pin Current (LYT0005) ............ 800 mA (1500 mA)(2)
to SOURCE voltage does not exceed 400 V.
Peak DRAIN Pin Current (LYT0006) .......... 1400 mA (2600 mA)(2) 3. Normally limited by internal circuitry.
FEEDBACK Pin Voltage..........................................-0.3 V to 9 V 4. 1/16 in. from case for 5 seconds.
FEEDBACK Pin Current................................................. 100 mA 5. Maximum ratings specified may be applied, one at a time,
BYPASS Pin Voltage...............................................-0.3 V to 9 V
Storage Temperature...................................... -65 °C to 150 °C
Operating Junction Temperature(3)................... -40 °C to 150 °C
Lead Temperature(4) .........................................................260 °C
without causing permanent damage to the product.
Exposure to Absolute Maximum Rating conditions for
extended periods of time may affect product reliability.
Thermal Resistance
Thermal Resistance: P Package:
Notes:
(qJA) ................................70 °C/W(3); 60 °C/W(4) 1. Measured on pin 2 (SOURCE) close to plastic interface.
(qJC)(1) .................................................11 °C/W 2. Measured on pin 8 (SOURCE) close to plastic interface.
D Package:
3. Soldered to 0.36 sq. in. (232 mm2), 2 oz. (610 g/m2) copper clad.
(qJA) ..............................100 °C/W(3); 80 °C/W(4) 4. Soldered to 1 sq. in. (645 mm2), 2 oz. (610 g/m2) copper clad.
(qJC)(2) .................................................30 °C/W
Conditions
SOURCE = 0 V; TJ = -40 to 125 °C
Parameter
Symbol
Min
Typ
Max
Units
See Figure 8
(Unless Otherwise Specified)
Control Functions
Average
62
66
4
70
Output
Frequency
fOSC
DCMAX
IFB
TJ = 25 °C
kHz
%
Peak-Peak Jitter
Maximum Duty Cycle
S2 Open
66
30
69
72
68
FEEDBACK Pin Turnoff
Threshold Current
TJ = 25 °C
49
mA
FEEDBACK Pin Voltage
at Turnoff Threshold
VFB
1.54
1.65
130
1.76
220
V
VFB ≥2 V
(MOSFET Not Switching)
See Note A
IS1
mA
LYT0002
165
173
190
226
260
280
310
330
DRAIN Pin
Supply Current
FEEDBACK Open
(MOSFET
Switching)
See Notes A, B
LYT0004
LYT0005
LYT0006
IS2
mA
9
www.powerint.com
Rev. A 06/13