CAPZero
Absolute Maximum Ratings(4)
DRAIN Pin Voltage(1)
CAP002-CAP009 ..............................825 V
Operating Ambient Temperature .............................-10 °C to 105 °C
CAP012-CAP019 .............................1000 V
Maximum Junction Temperature ............................. -10 °C to 110 °C
DRAIN Peak Current(2) CAP002/CAP012 ...........................0.553 mA
CAP003/CAP013 ...........................0.784 mA
Notes:
1. Voltage of D1 pin relative to D2 pin in either polarity.
2. The peak DRAIN current is allowed while the DRAIN voltage is
simultaneously less than 400 V.
CAP004/CAP014 ...........................1.026 mA
CAP005/CAP015 ...........................1.667 mA
CAP006/CAP016 ...........................2.222 mA
CAP007/CAP017............................2.667 mA
CAP008/CAP018 ...........................4.000 mA
CAP009/CAP019 ...........................5.333 mA
3. 1/16 in. from case for 5 seconds.
4. The Absolute Maximum Ratings specified may be applied one at
a time without causing permanent damage to the product.
Exposure to Absolute Maximum Rating conditions for extended
periods of time may affect product reliability.
Storage Temperature..............................................-65 °C to 150 °C
Lead Temperature(3) ..............................................................260 °C
Thermal Resistance
Thermal Resistance: D Package1:
Notes:
(qJA).................160 °C/W (Single layer JEDEC PCB) 1. Reference thermal resistance test conditions: JEDEC
(qJC)..........................................40 °C/W (Bottom)
(qJC)...............................................75 °C/W (Top)
JESD51-3, SEMI Test Method #G43-87, and MIL-STD-883
Method 10121.1.
Conditions
TA = -10 to 105 °C
Parameter
Symbol
Min
Typ
Max
Units
(Unless Otherwise Specified)
Control Functions
AC Removal
Detection Time
tDETECT
Line Cycle Frequency 47-63 Hz
22
31.4
ms
CAP002/012
CAP003/013
CAP004/014
CAP005/015
CAP006/016
CAP007/017
CAP008/018
CAP009/019
TA = 25 °C
0.25
0.37
0.48
0.78
1.04
1.25
1.88
2.5
Drain Saturation
CurrentA,B
IDSAT
mA
Supply Current
ISUPPLY
21.7
mA
Notes:
A. Saturation current specifications ensure a natural RC discharge characteristic at all voltages up to 265 VAC pk with the external resistor
values specified in Component Selection Table 1.
B. Specifications are guaranteed by characterization and design.
4
Rev. H 03/18
www.power.com
POWERINT [ Power Integrations ]
