PC10L-50
PC10L-50
COIL DATA
Coil Power
Resistance (Ohms ± 10%)
Must Operate
Voltage Max
(VDC)
Coil Voltage
Rated
6
9
12
24
48
Maximum Single Coil 1.5 Watts Dual Coil 2 x 3.0 Watts
7
24
54
12 + 12
27 + 27
4.8
7.2
9.6
19.2
38.4
10.6
14.4
28.8
56
96
48 + 48
384
1,536
192 + 192
768 + 768
Pulse Magnitude ≥ 50 ms;
NOTES:
With the Dual Coil Version, the Latch and Reset Coils should not be pulsed at the same time for it is possible to set the relay into a magnetically neutral position.
Coils should not be pulsed with less than the rated coil voltage and the pulse width should be a minimum of three times the specified operate time. If not, it is
possible for the relay to settle in a magnetically neutral position.
Dimensions are in mm, Inches are listed for reference only.
DIMENSIONS (inches/mm)
Bottom View of Relay
Top View of Relay
Side View of Relay
1A
1A Reverse
1A Dual
1A Dual Re-
Wire Diagrams
PC Board Layout Top View
3220 Commander Drive, Suite 102 Carrollton, TX 75006
www.PickerComponents.com
Sales: (972) 713-6272 (888) 997-3933
Fax: (972)735-0964
e-mail: sales@pickercomponents.com
Dimensions are listed for reference purposes only.
Specifications and Availability subject to change without notice.
PC10L–50 Rev B 2/08/2016
2 of 2
PICKER [ PICKER COMPONENTS ]
