POE61X Characteristics
WWW.PHIHONG.COM
INPUT:
AC Input Voltage Range
90 to 264VAC
EMC
FCC Part 15 Class A
EN55022 Class A
Isolation Test
AC Input Voltage Rating
Primary to Secondary: 4242VDC for 1 minute, 10mA
Primary to F.G.: 2121VDC for 1 minute, 10mA
Secondary to F.G.: 2121VDC for 1 minute, 10mA
100 to 240VAC, 47-63Hz
AC Input Current
2.0A (RMS) maximum for 90VAC
1.2A (RMS) maximum for 240VAC
Immunity
ESD:
RS:
EFT:
Surge:
CS:
EN61000-4-2. Level 3
EN61000-4-3. Level 2
EN61000-4-4. Level 2
EN61000-4-5. Level 3
EN61000-4-6. Level 2
Leakage Current
0.25mA maximum for 264VAC, 50Hz (U Models)
0.25mA maximum fro 264VAC, 50Hz (W models)
Voltage Dips EN61000-4-11
AC Inrush Current
30A maximum for 115VAC
60A maximum for 230VAC
(at cold start, 25°C)
Harmonic:
EN61000-3-2 Class A
Insulation Resistance
Primary to Secondary: >10M OHM 500VDC
Primary to Field Ground: >10M OHM 500VDC
OUTPUT:
Total Output Power
60W
FEATURE:
Over Voltage/Current, Short Circuit
Protection
Outputs equipped with short circuit protection and
overload protection.
Output Ripple
250mVp-p
The output can be shorted permanently without damage
DC Offset
No data degradation with DC imbalance 18mA
Input Connector
IEC320 C14 for U Models
IEC320 C8 for W Models
Efficiency
Meets Level V Requirements; 87% minimum
Output Connection
4-pair powering for Gigabit models
Pins 3,6, 4,5(+) Pins 1,2, 7,8 (-)
Hold-up Time
10mS min. 120VAC and maximum load
ENVIRONMENTAL:
Temperature
2-pair powering for non-gigabit models
Pins 4,5(+) Pins 7,8 (-)
Operation
Non-operation
0 to +40°C
-20 to +65°C
Warranty
1 Year
Humidity
Operation
5 to 90%