PDA072X Characteristics
WWW.PHIHONG.COM
Input:
Dimming Grounding
AC Input Voltage Range
90VAC to 304VAC
Dim(-) and Vout(-) must never be connected together to
ensure proper operation and isolation requirements
AC Input Frequency
EMC
47~63Hz
EN55015/CISPR 15/FCC 47 Part 15/18 Class A
Maximum Input Current
Immunity
≤ 2A
IEC61000-4-2
IEC61000-4-3
Leakage Current
IEC61000-4-4
0.5mA maximum at 230VAC Input
IEC61000-4-5*
IEC61000-4-6
Inrush Current
IEC61000-4-8
≤ 20A
IEC61000-4-11
IEC61000-3-2 Class C
*Surge Differential mode: 2.0kV, Common mode: 4.0kV
OUTPUT:
Power Factor
≥ 0.9
Ring Wave Surge (ANSI C62.41.2 Cat A)
Differential mode: 4.0kV
Ripple and Noise
Common mode: 6.0kV
<35% (p-p)
Input Over Current Protection
Efficiency
The input power line will be fused with a 2A fuse
87% at 277VAC
85% at 120VAC
Short-Circuit Protection
The PSU will withstand a short circuit across the
outputs without damage
Turn-on Delay Time
0.5s maximum at nominal AC Power ON
Open Circuit Protection
Environmental:
Temperature
Once the circuit is opened, the output voltage should be
less than 120% at nominal AC input conditions
Operation
Non-operation
-40 to +60°C
-40 to +85°C
Dielectric Withstand (Hi-pot) Test
Primary to secondary: 4242VDC for 1 minute, 5.5mA
Operating Humidity
10 to 95%
Insulation Resistance
Case Temperature
Primary to secondary: >5M Ohm 500VDC, 1 Minute
80°C maximum
Lifespan
Warranty
5 Years
50K Hours at full output power, 50°C ambient, Tcase <
rating
Dimming Function: (W Models)
Dimming Control
Wire Connections
Position Terminal Color
Specification
0-10VDC
Line
Neutral
Ground
Vout+
Vout-
Dim+
Dim-
Black
White
Green/Yellow
Red
AWG18 Solid Wire
AWG18 Solid Wire
AWG18 Solid Wire
AWG18 Solid Wire
AWG18 Solid Wire
AWG18 Solid wire
AWG18 Solid Wire
Dimming Output to Load
PWM at 500Hz
Blue
Violet
Grey
PHIHONG [ PHIHONG USA INC. ]
