欢迎访问ic37.com |
会员登录 免费注册
发布采购

MVS-2602 参数 Datasheet PDF下载

MVS-2602图片预览
型号: MVS-2602
PDF下载: 下载PDF文件 查看货源
内容描述: 机器视觉频闪灯 [Machine Vision Strobes]
分类和应用:
文件页数/大小: 2 页 / 39 K
品牌: PERKINELMER [ PERKINELMER OPTOELECTRONICS ]
 浏览型号MVS-2602的Datasheet PDF文件第1页  
MVS-2600 Series  
Optical Specifications  
MVS-2600 Series  
300 to 1100+ nm  
0.06 in (1.5mm)  
60 Hz maximum  
108 flashes  
6 microseconds typical  
<5%  
Photometric: 2.5 lumen-sec  
Radiometric: 20 mJ  
Spectral bandwidth (1)  
Flashlamp arc length  
Flash rate (2)  
Flashlamp life (4)  
Flash duration (2) (3)  
Flash to flash variation  
Light output (2)  
Note 1:  
Note 2:  
Note 3:  
Note 4:  
Spectral bandwidth may be extended into the ultraviolet by using other flashlamp envelope materials.  
Measured at light output port, 600 VDC and 4µf. Lower energy discharge levels providing higher flash rates and lower outputs are available.  
Measured at 1/3 of peak current.  
While maintaining >70% of initial intensity  
Environmental Specifications  
Operating temperature  
Storage temperature  
Shock and vibration  
-10 to +110°C (-23 to +43°F)  
-40 to +194°C (-40 to +90°F)  
1.5 g. 5 to 20 Hz per MIL-STD 810C  
Electrical Specifications  
Type  
Line input voltage  
MVS-2601  
115/230 ±10% VAC 50/60 Hz  
(115 factory set)  
MVS-2602  
15 to 28 VDC  
Input current  
1.2 amps maximum (115 VAC)  
225 to 750 volts  
43 watts maximum  
3 to 10VDC  
4 amps peak at 24 VDC  
200 to 750 volts  
43 watts maximum  
2 to 10 VDC  
Output voltage (1)  
Output power (2)  
Reference voltage (3)  
Tirgger input: (4)  
Trigger  
Pulse duration  
+5 volt pulse into opto-isolator with 150 ohm nominal series resistor  
10 to 100 microseconds  
Note 1:  
Note 2:  
Note 3:  
Note 4:  
Output measured @ front face of bulb.  
Up to 20 watts with heat sink and natural convection cooling. Above 20 watts forced air cooling is required.  
Output voltage may be adjusted using an external voltage reference source. MVS 2601, 75 volts per volt of reference. MVS 2602, 100 volts per volt of reference.  
Delay between flash command and light output is 8 microseconds typical.  
Mechanical Specifications  
MATING INPUT  
CONNECTOR(S)  
SUPPLIED  
0.218 X 0.281 MOUNTING SLOT (4 PLCS)  
8.50 (215.9)  
NEMA 13 ENCLOSURE  
WEIGHT 6.5 LBS (3.0 kg)  
DIMENSIONS ARE IN  
INCHES (MILLIMETERS)  
NOSEPIECE,  
BLANK ADAPTER  
AND HEAT SINK  
SUPPLIED WITH  
ALL MVS-2600  
SERIES UNITS  
4.25 (108.0)  
9.25 (235.0)  
For more information e-mail us at opto@perkinelmer.com or visit our web site at www.perkinelmer.com/opto.  
All values are nominal; specifications subject to change without notice.  
USA:  
Europe:  
Asia:  
PerkinElmer Optoelectronics  
35 Congress Street  
Salem, MA 01970  
Toll Free: (800) 950-3441 (USA)  
Phone: (978) 745-3200  
Fax: (978) 745-0894  
PerkinElmer Optoelectronics  
Wenzel-Jaksch-Str. 31, D-65199  
Weisbaden, Germany  
Phone: +49 (0) 611-492-437  
Fax: +49 (0)611-492-159  
PerkinElmer Optoelectronics  
47 Ayer Rajah Crescent #06-12  
Singapore 139947  
Phone: +65 775 2022  
Fax: +65 775 1008  
.
© 2001 PerkinElmer inc. All rights reserved.  
0601  
www.perkinelmer.com/opto