Dimensions (mm)
MD 900 Series
MD 1300 Series
MD 1900 Series
Connections
Red: Vcc, input (+5 V to +5.5 V DC)
Black: GND
Coax: External Gate in (TTL,active high)
Yellow: Monitor voltage output (|Vch-ent /1000|)
BNC Connector:
-
-
DC 0 - 10 V Signal Output
GND
Green: Control voltage input via ext.
OpAmp (ref. to manual)
CPM
·
CAUTION: HIGH VOLTAGE WARNING
This product operates at high voltage. Extreme care must be taken to ensure operator safety and to avoid damage to other
instruments. Avoid direct contact with the entrance window of the built in CPM when high voltage is applied. Avoid placing
conductive material close to the cathode.
Ensure that no light levels are applied, generating higher anode currents than specified.
All given values are nominal/typical @ 20 °C ambient temperature; specification subject to change without notice
USA:
EUROPE:
ASIA:
PerkinElmer Optoelectronics
2175 Mission College Blvd.
Santa Clara, CA 95054
Phone: (408) 565-0850
Fax: (408) 565-0793
PerkinElmer Optoelectronics GmbH
Wenzel-Jaksch-Str. 31
65199 Wiesbaden
Germany
Phone: +49 611 492 534
Fax: +49 611 492 578
PerkinElmer Optoelectronics
47 Ayer Rajah Crescent #06-12
Singapore 139947
Phone: +65 775 2022
Fax: +65 775 1008
.
© 2001 PerkinElmer, Inc. All rights reserved.
DS-287 Rev A 1101
w w w. p e r k i n e l m e r. c o m / o p t o
PERKINELMER [ PERKINELMER OPTOELECTRONICS ]
